carrier seal....??

[jeepron]

ok,so i tried my local motorcycle shops and no one has any in stock,,,i work at a truck dealer and we are a distributor for a crapload of seal companies,,anyone know of a seal i can use,part number etc....thanx in advance

[CJM]

See here: http://www.exriders.com/vbb/showthread.php?s=&threadid=469141&highlight=bearing

The seal number is 52x62x7. Thats for a dual row carrier (thicker bearings) but if you can measure the seals they might be the same. Just google for the seals or call up your suppliers then. Seals are measured by mm size. Inside, outside diameters and then thickness.

btw, this site sells the entire kit bearings and seals for 20 bucks. http://store03.prostores.com/servlet/atvdirtbikebearingsandseals1/the-2595/REAR-AXLE-BEARINGS-SEALS/Detail

[jeepron]

its actually an aftermarket carrier(lonestar) i already got the bearing number since we are a timken dealer,,just trying to not have to order seals and wait a week

[CJM]

Then that 52x62x7 size will fit it just fine.

[jeepron]

thats the same as the stock ones i believe

[CJM]

Im sure it will fit fine. The dual row bearings go further into the carrier since they are thicker. But the seals should be the same. Measure yours with a caliper, I bet its the same.