View Full Version : carrier seal....??
jeepron
07-03-2011, 10:55 PM
ok,so i tried my local motorcycle shops and no one has any in stock,,,i work at a truck dealer and we are a distributor for a crapload of seal companies,,anyone know of a seal i can use,part number etc....thanx in advance
See here: http://www.exriders.com/vbb/showthread.php?s=&threadid=469141&highlight=bearing
The seal number is 52x62x7. Thats for a dual row carrier (thicker bearings) but if you can measure the seals they might be the same. Just google for the seals or call up your suppliers then. Seals are measured by mm size. Inside, outside diameters and then thickness.
btw, this site sells the entire kit bearings and seals for 20 bucks. http://store03.prostores.com/servlet/atvdirtbikebearingsandseals1/the-2595/REAR-AXLE-BEARINGS-SEALS/Detail
jeepron
07-03-2011, 11:22 PM
its actually an aftermarket carrier(lonestar) i already got the bearing number since we are a timken dealer,,just trying to not have to order seals and wait a week
Then that 52x62x7 size will fit it just fine.
jeepron
07-03-2011, 11:25 PM
thats the same as the stock ones i believe
Im sure it will fit fine. The dual row bearings go further into the carrier since they are thicker. But the seals should be the same. Measure yours with a caliper, I bet its the same.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.