airbox setup's

[lsr_quads]

Hey guys I need help, I was wondering if people would post some pics of the airbox setup's they have on their hybrid's. I am running an LSR no-link and I want to run an airbox. I dont want a generic setup just to run an airbox. If there is a thread on this I am sorry upfront.
Alan

[gtilley45]

That was what I hated most about my LSR CRF. The intake set up on it was a REAL pain in the @ss to put on or take off. I don't have any pics of it, but you wouldn't want to copy it anyway. The Walsh and Laeger hybrids have the best intake set up I've seen on a hybrid. Here's the one on my Walsh YZ. It's just a metal tube that goes from the carb to a 250R airbox. It has the rubber boots at each connection with hose clamps to tighten down.
http://i224.photobucket.com/albums/dd132/gtilley45/Walsh%20YZ%20hybrid/Picture144.jpg
http://i224.photobucket.com/albums/dd132/gtilley45/Walsh%20YZ%20hybrid/Picture128.jpg
http://i224.photobucket.com/albums/dd132/gtilley45/Walsh%20YZ%20hybrid/Picture129.jpg

I've been hearing of people using the YFZ intake tube on hybrids lately. People use to use the LT500 intake boot a lot too. I my LSR CRF had that along with a metal tube that had to go from the LT500 boot to the carb and it was just too much of a hassle to get all that lined up and connected.

[JHF219]

custom built by Pinit, uses LT500 boot. for the price this was the only way to go!! contact him if you want him to build you one!!

[JHF219]

it will never hit the swingarm unless the shock breaks!! I have 2 baldwin chrom metal intake tubes for hybrids that allow you to use a stock 250R box, if your interested I have a complete box with tube that i will sell.

[SpasticR450]

I used a lt 500 boot and jl atv $25 bracket. Also the notch in the frame for the boot. I didnt raise the bar I notched it and put a gesset under it.