I got breaks

[GOTFEAR]

I found out that you can put yfz450 front breaks on my 250r with little mods. you need .450 thick spacer to space out the break bracket bolt up the bottom bolt first line up the break pads with the disk you will need to drile and tap a 8m x 1.25 on top thats it

[Meat]

Brakes

[J250r]

Yeah i thought your frame was broken :(

[snacob14]

or, you can run 400ex spindles and the yfz's will bolt right on.

[gtilley45]

Originally posted by snacob14
or, you can run 400ex spindles and the yfz's will bolt right on.
That's the exact setup I'm running on my Walsh YZ.

snacob14- I tried to respond to your PM but your inbox is full. If you want to, send me an email to gtilley45@yahoo.com.

[snacob14]

I cleared out my pm's.

[GOTFEAR]

Originally posted by GOTFEAR
I found out that you can put yfz450 front breaks on my 250r with little mods. you need .450 thick spacer to space out the break bracket bolt up the bottom bolt first line up the break pads with the disk you will need to drile and tap a 8m x 1.25 on top thats it that's right

[GOTFEAR]

Originally posted by Meat
Brakes yea bad spelling but break.com is my favorit funny sites