What is the difference anyone

[atvmbaca]

I would like to know what the difference whould be using the Hot Cams stage 2 and the WEB Cam 450/451 grind both would use the same compression (10-8-1 or 11-1) and where will most of the usable power be in the powerband, thanks for those who can answer this question.

[Scott400EX]

With the web cam you will have to get hardfaced rockers and valve springs. not to mention u have to send WEB your stock cam to get the 150 bux core charge back
with the hotcam 2 u can use the stock stuff.

[atvmbaca]

what about the power !!

[Scott400EX]

im not sure about the power of the WEB cam if the numbers are the lift on the cam then it would be a lot more than the hotcams 2
I have the hotcams2 and it made a lot of power mid to top end.
im not sure of the exact numbers on the WEB cam to say for sure

[BKVIEW4U]

i do believe the web cam is bigger . therefore more top end power. but the hotcam2 is only 119 dollas and works really well

[atvmbaca]

would the hotcams stage 1 be better for aggresive trail riding I am looking to add more torque I would like to go back to the stock 15tooth front sprocket but with the stock 15t it doest pull hard enough that why I am using a 14tooth sprocket!!!!

[Colby@C&DRacing]

If you do not have a high compression piston than you have to use the stage 1 . It is made for the stock motor. A stage two in a stock motor will make less HP than the stae 1.

[atvmbaca]

What about the stage1 and the high comp piston how will this
perform??????

[Steve-o 400EX]

It will perform, but not as well as the stage 2 will with a high compression piston. Its ur call depending on what you want to do, if ur upping the compression, go with stage 2, if ur staying with the stock piston go with a stage 1.

Good luck.:macho

[Ryan]

isn't the Hot Cam Stage 2 better for more modified motors rather then the Stage 1?