I need a 450r rear shock & linkage, buy or trade

[SHIFTx450]

I have laying around a PEP Zero Preload shock w/ baldwin linkage both go together for a 400ex MX setup. I'm looking for a 06+ 450r setup, preferably XC rear shock & linkage.

I will buy or trade, doesn't matter much. I just need a setup!!

Doesn't need to be XC, just thought I'd like it better. I have on my 400ex an axis shock that I absolutely love, and I'd love to have another. This PEP w/ Baldwin linkage came from my Hybrid.

Let me know!!

[jonnyroy28]

I have the stock linkage that will work if the rear shock is standard travel...

[SHIFTx450]

Won't work, but thanks. The legs on the pep shock are shorter and won't let it mount to the stock linkage, I already tried. I have it on temporarily so I can move the bike around but it's no good I don't think. Seems like it travels ok but it sits about an inch and a half higher than the stock shock and linkage.

Unless someone can tell me that this Baldwin link and pep long travel shock for a 400ex will work safely for my 06 450r, and that thr increase in seat height is normal or ok, then I need something else.

[mxquadrider2]

get ahold of me. I got a JB Swinger and linkage that I will sell you. Im even in pa and could prolly meet up with you. Have a Fox rear shock for the setup as well. 8142514125

[mx Eli]

the 400ex link and shock will not work on the 06+ 450r swing arm, well it may mount up is not very safe. A aftermarket 04/05 swing arm will work with your 400ex link and shock though!