Front heim joints????

[mildtowildracin]

im trying to get the heims off the stock ltr aarms but they just wont come out, idk if im doing it wrong or if its just that stuck in there, wev been beating on them for about 20 min and they haven't budged :confused:

[gimp419]

If I remember right...they don't come out. The stock arms don't have replaceable ball joints. Why suzuki shafted us and cut a corner here I don't know.

[kfx400rider03]

^ that correct
but i heard of people cutting them off and threading the piece of metal and putting threaded ball joints in where you can adjust the camber

[bosshogg1]

I had asked the same question an I'v found a guy on ltr who did this set-up he used volkes wagon hiem jionts I hope this thread went through good luck.....I don't think it is going through... you might have to go on ********. you ask the same question an I or some one else will give you the thread for this set-up

[bigbad400]

60s Volkswagen beetle ball joints just drill out and a arms tread them and install.:D works on stock 400 ex too. :D hillbilly ingenuity. lmoa :cool:

[SpasticR450]

Originally posted by kfx400rider03
^ that correct
but i heard of people cutting them off and threading the piece of metal and putting threaded ball joints in where you can adjust the camber

There's a thread showing how to do that