this is sweet but im stumped

[01boneless]

ok guys as a few of you know I am in the process of changing my carrier bearings so a minute ago i poped off the snap ring that holds the carrier and slid out the carrier.than I seee a grease zert and I know stock dont have grease zerts so i figure someone installed a zert there self on a stock carrier then i see a model number that says lsr5.2blabla turn it over and i see lone start racing carrier or LSR so thats cool a lsr but now i dont know were to get bearings. cause i called my buddies shop and he had some for 35 for a stock carrier but i think this is a dual row i found these on ebay

http://cgi.ebay.com/ebaymotors/REAR-AXLE-BEARINGS-SEALS-TRX400EX-DUAL-TWIN-ROW-400EX-_W0QQcmdZViewItemQQhashZitem563bc2b8cbQQitemZ37036 9804491QQptZMotorsQ5fATVQ5fPartsQ5fAccessories

take a look and tell me what ya think thanks guys heres some pics of my carrier

[01boneless]

if the link dont work go on ebay and type 400ex rear bearings and its the 4th or 5th one down it says dual row

[honda400ex2003]

i would say that those would work good for you.

def cool to have a different one in there, that will be nice once you get the new ones in there and ready to rock.

steve

[CJM]

Yep thats a dual row. I cannot recall the bearing numbers, but once you get one of the bearings out you can see it. If you google the bearing number it turns out to be a bearing for a 99 chevy 2500 w/350 V8 a/c compressor. Possibly other chevy a/c compressors as well

I found the link and number I think (saved in my favs) #907257 and http://www.rockauto.com/dbphp/x,carcode,1353350,parttype,6548,d,1999_CHEVROLET_K 2500_PICKUP_5.7L_350_cubic_inch_V8_FI_R_OHV_A-C_Compressor_Bearing.html

Then of course rad sells these with the seals- http://www.radmfg.com/ABS-2-Bearing-Seal-Kit-Double-p/abs-2.htm

Id buy the rad kit for 40 bucks, rad is good stuff and you cant beat the price vs lonestar (what I bought but I needed them asap and couldnt find much else at the time).

Could also call up an auto supply warehouse and ask for bearing #907257 and they got them. Just finding seals might be difficult. Google it and see what ya get. The seal number is 52x62x7.

Yes, I know Im awesome :D

[01boneless]

ya its pretty cool but ive never herd of those bearings (prob off brand ) and im afraid they might suck

[CJM]

They are probably ok. Most bearings are made by timken or skf anyways.

You see the info I posted?

[01boneless]

Originally posted by CJM
Yep thats a dual row. I cannot recall the bearing numbers, but once you get one of the bearings out you can see it. If you google the bearing number it turns out to be a bearing for a 99 chevy 2500 w/350 V8 a/c compressor. Possibly other chevy a/c compressors as well

I found the link and number I think (saved in my favs) #907257 and http://www.rockauto.com/dbphp/x,carcode,1353350,parttype,6548,d,1999_CHEVROLET_K 2500_PICKUP_5.7L_350_cubic_inch_V8_FI_R_OHV_A-C_Compressor_Bearing.html

Then of course rad sells these with the seals- http://www.radmfg.com/ABS-2-Bearing-Seal-Kit-Double-p/abs-2.htm

Id buy the rad kit for 40 bucks, rad is good stuff and you cant beat the price vs lonestar (what I bought but I needed them asap and couldnt find much else at the time).

Could also call up an auto supply warehouse and ask for bearing #907257 and they got them. Just finding seals might be difficult. Google it and see what ya get. The seal number is 52x62x7.

Yes, I know Im awesome :D


you ar awsome so rad or s-10 bearings haha how bout them ones on ebay?

[CJM]

Either or really, imho the rad kits hard to beat. Figure a seal is about 3-5 bucks and you need 2 and each bearings between 10-20 bucks. Rad kits like 40 for it all.

[01boneless]

Originally posted by CJM
Either or really, imho the rad kits hard to beat. Figure a seal is about 3-5 bucks and you need 2 and each bearings between 10-20 bucks. Rad kits like 40 for it all.

so the rads or ebay would be my best bet i probly do ebay ones (hope they last) cause there cheaper and i got to get brake pads and a new clutch cable to lol woowers a s10 :)

[greencow]

Thats a cool find, now you have dual row at no price to you sweet.

[01boneless]

Originally posted by greencow
Thats a cool find, now you have dual row at no price to you sweet.

yup lol

[01boneless]

how do you get the dang seals out of this thing?