1promodfan
05-23-2011, 04:06 PM
I'm parting out my drag 250R. Its never been down the track in its current state. Was going to finish building, but going a different route. All prices are shipped unless otherwise noted.
Arens frame with removable sub-frame. This frame will come with the CR250 brake pedal which is standard with an Arens frame. Frame is electric blue and subframe is metallic. $750.00 +shipping
Front rigid drag arms, made by Proformance Prototypes. These are brand new and have never been ran. They are -2 +3 1/2 and are painted with Dupont metallic. Also I will include the rear strut. $400
Proformance Prototypes, BRAND NEW drag stem $100
Proformance Prototypes, BRAND NEW wheelie bar. Its the 3-bar setup, the third bar mounts to the top shock mount. It seperates in the middle and has plenty of adjustment. $275 +shipping
22X11X8 12 Paddle extremes 72 RO on Honda bolt pattern wheels $425
CPI Sphynx cylinder/head shell 78mm bore, nikasil, ported for a 4mil crank by Nate McCoy. Nate told me this was run for one race. Its already been tapped for alky on the side of the transfer port. Comes with ARP head studs and will come with an ESR billet exhaust flange. There is no dome, or piston with this. $600
2001 CR250 ignition with ESR adapter plate. $400
Full Bore fenders, rear has typical burn. The rears have also been cut down. $150 +SHIPPING
BRAND NEW ESR reed cage. $125
Shearer OOF pipe. It has only 6 passes on it. Comes with '89 footpegs. The left peg has the pipe mount welded on. Matt said it would work with a 310-370. $400
Lonestar MX axle, anti-fade, and hubs. $175 +SHIPPING
Radiator with hoses $30
Pro Wedge tires/wheels $125 +SHIPPING
Clutch lever with braided clutch cable $25
http://i155.photobucket.com/albums/s291/1promodfan/250rpartsforsale019.jpg
Arens frame with removable sub-frame. This frame will come with the CR250 brake pedal which is standard with an Arens frame. Frame is electric blue and subframe is metallic. $750.00 +shipping
Front rigid drag arms, made by Proformance Prototypes. These are brand new and have never been ran. They are -2 +3 1/2 and are painted with Dupont metallic. Also I will include the rear strut. $400
Proformance Prototypes, BRAND NEW drag stem $100
Proformance Prototypes, BRAND NEW wheelie bar. Its the 3-bar setup, the third bar mounts to the top shock mount. It seperates in the middle and has plenty of adjustment. $275 +shipping
22X11X8 12 Paddle extremes 72 RO on Honda bolt pattern wheels $425
CPI Sphynx cylinder/head shell 78mm bore, nikasil, ported for a 4mil crank by Nate McCoy. Nate told me this was run for one race. Its already been tapped for alky on the side of the transfer port. Comes with ARP head studs and will come with an ESR billet exhaust flange. There is no dome, or piston with this. $600
2001 CR250 ignition with ESR adapter plate. $400
Full Bore fenders, rear has typical burn. The rears have also been cut down. $150 +SHIPPING
BRAND NEW ESR reed cage. $125
Shearer OOF pipe. It has only 6 passes on it. Comes with '89 footpegs. The left peg has the pipe mount welded on. Matt said it would work with a 310-370. $400
Lonestar MX axle, anti-fade, and hubs. $175 +SHIPPING
Radiator with hoses $30
Pro Wedge tires/wheels $125 +SHIPPING
Clutch lever with braided clutch cable $25
http://i155.photobucket.com/albums/s291/1promodfan/250rpartsforsale019.jpg