416ex Jetting

[mitchconley]

I am in the middle of doing a 416 so im assuming I need to re-jet my wheeler. Im going to start at 172 main and work my way down from there and 42 pilot. Does this sound reasonable or does somebody think I should get different ones?
I have a white bro's slip on and I run with the air filter lid on. not sure about evavation.

[mitchconley]

Also what are the sizes of the main and pilot jet on a stock 400?

[honda400ex2003]

stock is

148
38
2.25 turns out
3rd notch on the needle


my suggestion-

175 main (probably 170 or 172 depending on elevation and temps)
42 pilot 2.5 turns out
3rd notch

steve

[01boneless]

Originally posted by honda400ex2003
stock is

148
38
2.25 turns out
3rd notch on the needle


my suggestion-

175 main (probably 170 or 172 depending on elevation and temps)
42 pilot 2.5 turns out
3rd notch

steve

if i had a dollar for every time youv said this lol :)

[honda400ex2003]

broken record man....

he was pretty close though and will probably end up there.

oh well,
steve

[CJM]

The sticky damn it, read the damn sticky!


:mad:

[01boneless]

Originally posted by CJM
The sticky damn it, read the damn sticky!


:mad:

lol