View Full Version : wont start or run
zukiboy
05-16-2011, 09:25 AM
My Banshee has fresh fuel in it new plugs and good spark...... it wont kick over I even checked to see if the jets were gummed up but there clean as a whistle ....... any body got any ideas
justabanshee
01-02-2012, 01:28 PM
To rich mabee ... bad gas,
Muggzy
01-02-2012, 03:35 PM
Originally posted by zukiboy
My Banshee has fresh fuel in it new plugs and good spark...... it wont kick over I even checked to see if the jets were gummed up but there clean as a whistle ....... any body got any ideas
What changed since you last ran it? Is the weather there much colder than the last time you ran it? If this is the ONLY thing you can think of since you last ran it, then you're prob. running way too lean. Turn the air-bleed screws in a half turn (ea), then a quarter-turn at a time until it starts. If that does it, increase your mains two sizes before you even think about riding it http://i870.photobucket.com/albums/ab266/Muggzy_photo/Icons/smiley-shakehead-blue.gif even for a minute. You'll have to re-jet for winter temps.
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.