Who was the guy that moved their rear shock mount?

[250Renvy]

Somebody on here moved the rear shock mount up.

I can't remember who and if they used a different linkage or stayed with oem and how that worked out.

I'm thinking of moving my stock linkage mount up to a no-link position so I can run a no-link shock but was wondering if I do that, can I still run a stock shock that is just longer?

1-2 inches is the most I think I can go.

[K-Dub]

I think this might be the thread your looking for.
National mx (http://www.exriders.com/vbb/showthread.php?s=&threadid=423445)

[2-330s]

contact pinitatv on this site. no link shocks are mounted higher,the cr500 set up is higher and to the left from the rear if i rember correct?

[mx Eli]

330 I think it's to the right in order for the intake to be routed around the shock:devil:

[pinitatv]

I've moved the top rear mount on a stock 250r frame in the past to be able to run a no link. I made it the same dimensions as a Lonestar DC2 no link frame.

Unfortunately, I don't have any great pictures of the modifications but if you need the dims I made a bracket that would just sit on your stock location and locate the new holes.

I included a pic of the quad you can't see much but you can tell its a no link. Let me know if you want more details.

[265 sleeper]

I have a no link setup ill see if I can post some pics bike down right now the ones I have are small enough to post from my phone