Are bodies changeable with other brands?

[Doug10]

I sit in the garage gulking at how sad it is, that the body on Austins Polaris Scrambler 50 has about every tab possible broke off, and at how hard it is to find them in colors other than yellow and red.

Then i noticed how the DRR body has pretty much the exact same configuration. Does anyone know if it would bolt right on? I have 2 tabs under the front fenders, 2 screws in the side where they front and rear overlaps, and 2 bolts under the seat it looks like. I noted that the drr and polaris have the overall same mounting system as well as the key and all in the same spots. I also noted they are available in a variety of flavors and I bet they hold up better.

Doug

[Logan #34's Dad]

I'm sure the rear will mount right up. The front half may be different at the front two tabs. If you wanna change it up, just make some tabs that bolt to the plastic and then to the frame.
I saw an Apex with the Suzuki 90 plastic. It looked bada**!
You can make it work.

[Nichols Atvs]

i just mounted drr plastic to and apex and a freind put polaris preditor on a scambler 50

[quadscrib]

Theyre all 95% interchangeable from what Ive seen.