View Full Version : rear axel
jtalleman
04-18-2011, 06:37 PM
my rear axel keeps coming loose. i know they make the anti fade nut but i dont wanna spend 250 bucks on one so what have yall found that works good
NMills
04-18-2011, 06:50 PM
Original stock from the factory one seems to work for me...
Is it put on properly???? tourqed to spec?
duroc825
04-18-2011, 07:10 PM
Duct Tape and/or Loctite has always worked for me.
250rsforlife
04-18-2011, 08:07 PM
Originally posted by duroc825
Duct Tape and/or Loctite has always worked for me.
I like ur style
Are you sure your tightening it good? Outer nut gets tightened towards tire and smaller inner nut goes up against it.
supertrooper90
04-19-2011, 04:33 AM
check out RAD mfg. they sell a locknut that is only $50 or so.
250x_kyle
04-19-2011, 01:10 PM
make sure its tightened up in the correct way. jam nut setup out nut is tight then the inner one up against. use a littlelock tight on it and wrap in electrical tape. worked for me
JOHNDOE83
04-19-2011, 02:03 PM
My stock axel never loosend the nuts, my gforce axel loosens up all the time.
The best fix for this is actually electrical tape....lol.
My electrical tape has lasted for 2 years now and still looks alright.
jtalleman
04-19-2011, 04:44 PM
oh i thought that little inner nut went ot the brake hub and the bigger one went towards the outside
Originally posted by jtalleman
oh i thought that little inner nut went ot the brake hub and the bigger one went towards the outside
That could be part of the problem...
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.