JustinBoots
04-18-2011, 01:54 PM
Complete 90cc "Jahner Motorsports" built engine - $450 shipped
- Malossi Ported/Polished Big Bore top-end
- Bottom-end polished and clearanced to match
- Full Circle Crank
- Stock Tranny Gears
- No accessories (Example: Stator, Clutches, intake, carb, CVT cover, etc.)
- Motor was built per engine builder engavings 2-22-2010 and was only run for 5 races. I bought the bike with this engine on it in August because the previous owner's son did not want to race. My son is too young to race the 90cc class so I have stored the engine since we got the bike basically.
PCS 90cc DRR Pipe - $200 shipped
- includes the exhaust flange and muffler
- Only run 5 races as well
- Does have some black staining that can be cleaned
Pollini "Jahner Motorsports" built Ported/Polished 50cc top-end kit - $200 Shipped
- Includes piston, cylinder, head
- Will need o-rings
- We ran this top-end for 5 minutes and that's all. jsut wanted to make sure my motor came back from the builder in running shape. Our rules changed mid-build to where we are only allowed to run stock top-ends so this was put back in a box.
Malossi 50cc cylinder head - $40 shipped
- It's been welded and turned down to increase compression
- Labeled as race gas only head from builder
DRR 50cc stock exhaust pipe with muffler - $50 shipped
I tried to insert pictures on this post but I can't figure it out. If you want pictures I can email you them.
- Malossi Ported/Polished Big Bore top-end
- Bottom-end polished and clearanced to match
- Full Circle Crank
- Stock Tranny Gears
- No accessories (Example: Stator, Clutches, intake, carb, CVT cover, etc.)
- Motor was built per engine builder engavings 2-22-2010 and was only run for 5 races. I bought the bike with this engine on it in August because the previous owner's son did not want to race. My son is too young to race the 90cc class so I have stored the engine since we got the bike basically.
PCS 90cc DRR Pipe - $200 shipped
- includes the exhaust flange and muffler
- Only run 5 races as well
- Does have some black staining that can be cleaned
Pollini "Jahner Motorsports" built Ported/Polished 50cc top-end kit - $200 Shipped
- Includes piston, cylinder, head
- Will need o-rings
- We ran this top-end for 5 minutes and that's all. jsut wanted to make sure my motor came back from the builder in running shape. Our rules changed mid-build to where we are only allowed to run stock top-ends so this was put back in a box.
Malossi 50cc cylinder head - $40 shipped
- It's been welded and turned down to increase compression
- Labeled as race gas only head from builder
DRR 50cc stock exhaust pipe with muffler - $50 shipped
I tried to insert pictures on this post but I can't figure it out. If you want pictures I can email you them.