Wide peg AC pro pegs

[bigmatt61]

I'm looking for some wide peg AC pro pegs. I don't think they make them any more and need a set for a build I'm doing.

Any help?

Matt

[troybilt]

Matt, look at my thread with the Arens frame. Are those the ones you're looking for?

[bigmatt61]

Close. I just called and talked to someone at AC. They are going to send me a photo of some nerfs that they still have the jigs for and made a small run of 2yrs ago but they don't list on their website.
I'm looking for some wide pro pegs for the Leager/ Lonestar ( that's what she called them) with the kick-ups. It would be AWESOME to have some Dana Creech pro peg models for the R.

She said they actually get quite a few calls for 250r stuff that they used to do. I tried to tell her that they aren't dead, and we need the aftermarket mfg's who made the parts for them to make them again and list them for sell on their sites.

I'll let you know when I get the pics.

Matt

[FL-R]

Same here, Id love to Have some Dana Creech Nerfs

[wild250rman]

Originally posted by bigmatt61
Close. I just called and talked to someone at AC. They are going to send me a photo of some nerfs that they still have the jigs for and made a small run of 2yrs ago but they don't list on their website.
I'm looking for some wide pro pegs for the Leager/ Lonestar ( that's what she called them) with the kick-ups. It would be AWESOME to have some Dana Creech pro peg models for the R.

She said they actually get quite a few calls for 250r stuff that they used to do. I tried to tell her that they aren't dead, and we need the aftermarket mfg's who made the parts for them to make them again and list them for sell on their site


could you post the pics here?

I'll let you know when I get the pics.

Matt

[sameltoe]

these?

[jhtrx250r]

I have a set just like those on one of my bikes same power coat crazy
I think I have the ones you are talking about let me see if I have a pic?

[bigmatt61]

True "pro peg" nerfs have the foot rest welded or bolted on the nerfs and the nerfs slip onto posts welded onto the frame.

This is the photo she sent me. It looks like the mounting is correct and the pegs look to be steel or stainless and bolt on the nerfs.
Kinda like the LRD's I got from you Troy!

Me thinks me will be gettin me some O' them!

Matt

http://i24.photobucket.com/albums/c33/bigmatt61/IMG00138.jpg

[danhung11]

Originally posted by bigmatt61
This is the photo she sent me. It looks like the mounting is correct and the pegs look to be steel or stainless and bolt on the nerfs.

That's exactly what I have on my Laeger build. The are nice, but a beotch to get onto the propegs. It would be nice to have a heavy mallet... I just have a rinky dink one. :ermm:

[Flyin_250r]

I think I have an older set of what you mean... close?

[FL-R]

You mean these
http://i21.photobucket.com/albums/b262/southernkrawlers/IMAG0277.jpg

[stever250r]

Dont mean to hijack...forgive me... .

I normally dont like the big bulky heel guards on Nerf Bars, but I kinda dig this look with the nets....

Looks like they are made to bolt up to stock mounts,,,

Does anyone know of a similar desing for Pro Peg??

[8686]

I think you're all off. I believe he is talking about these.

http://i56.tinypic.com/lfvow.jpg

[reconracer64]

i just bought a set of those ^^^^ off ebay im pretty sure they are they same lol

[bigmatt61]

The Creech's in the above photo is what I would really like to have, but they don't make them anymore.
I would settle for the one's like on FL-R's quad photo if I could get them.
Flyin 250r, those would work too.
But the only ones that are available are on AC's website with the heel guards or the ones in the photo I posted.

[gtilley45]

I have a set like the pic she sent you, but I haven't put them on yet. I had a set of them on my YFZ except the peg went all the way to the outside of the nerf bar.

[troybilt]

What are these nerfs? I never seen these AC's before: (when you side wide peg, I thought this is what you meant, these are double wide, with kickups...)

http://i74.photobucket.com/albums/i260/robltc/LSR%20BIKE/DSCN1426.jpg

[C41Xracer]

WOW Troy those pegs are huge, how do they feel? is it easy to pivot on?

[troybilt]

Originally posted by C41Xracer
WOW Troy those pegs are huge, how do they feel? is it easy to pivot on?

The feel great, the little bit that I rode on them... during test ride. I've never seen these before.

[Pro1200]

just get custom Rath nerfs = solution there pegs are insane

[troybilt]

Originally posted by Pro1200
just get custom Rath nerfs = solution there pegs are insane

Several here have tried including myself... They are TOO busy to help us with 250r stuff. I personally talked to Jen there about these and some other stuff. They'd like to help, but too busy. This was 8-10 wks ago...

[J.B.]

Troy yours look like someone doubled up on the ac pegs...:confused:

[troybilt]

Originally posted by J.B.
Troy yours look like someone doubled up on the ac pegs...:confused:

Yes, forsure, but it must have came from AC that way... The dude I bought the bike from struggles to put his pants on in the morning, so I know he didn't weld it... Looked factory welds.

[stever250r]

Originally posted by troybilt
Yes, forsure, but it must have came from AC that way... The dude I bought the bike from struggles to put his pants on in the morning, so I know he didn't weld it... Looked factory welds.

LMAO...:D :D :D

[trx250racer]

are these what you are looking for??? i have this brand new set i have been hanging on to for a while now.
http://i1085.photobucket.com/albums/j438/TRX250RACER/nerfs003.jpg

http://i1085.photobucket.com/albums/j438/TRX250RACER/nerfs004.jpg

http://i1085.photobucket.com/albums/j438/TRX250RACER/nerfs005.jpg

[97Rocks]

I would like to buy the set pictured with the red nets, they are a bit longer at the front tubes where the mounts are, with the black nets. PM'd you....

[etccb]

Here is an email that I sent to AC this week.

Sent: Wednesday, April 13, 2011 9:46am
Subject: trx250R

What nerf bars with foot pegs do you have available for the 1987 trx250R and how much are they.
Thanks


Thu 4/14/2011 6:01 PM
We don't have any available for that model.
Sorry

[socal]

Originally posted by Pro1200
just get custom Rath nerfs = solution there pegs are insane Just custom fit your own,see the thread I started in this.Mine were Rath nerfs from a YFZ,but from what I have read,the Z400 is a closer fit.With a little work,you can fit up better quality stuff than that AC garb.,they dont care about the 250r either!

[etccb]

I just got off the phone with XFR. Real cool guy. He doesn't offer the pro series 2 at this time for the 250r's but he does offer the pro series 1. The pro series 1 will now have a 2" peg and a removable heal guard. He said that he could put them together to ship on tuesday. I am still a month or 2 away from that step with this build but unless something changes my mind I will be putting these on it. 225 shipped with 2" pegs and removable heal guards.
He did say that he would be interested in offering the pro series 2 but he would need 86-87 and 88-89 quads to make the first ones on. Anyone near St George Ut?

Photo of pro series 1 but it will now have a 2" wide peg.

[etccb]

Pro series 2 If someone can get 86-87 and 88-89 quads to him.

[01shee]

I have these for sale for $50 plus shipping.
http://i785.photobucket.com/albums/yy138/1bad88r/2011-04-10091426.jpg

[socal]

Originally posted by etccb
Pro series 2 If someone can get 86-87 and 88-89 quads to him. Those are nice!

[etccb]

He is down with the 250r. He just needs a quad to build the first series 2 ones with. We needed someone like him and it looks like we found em. He also has 3 different front bumpers for the 250R. I might go with one of his bumpers to support a company that is willing to make what we need for the ol 250R. I would like to see a set of the series 1 nerfs with the new 2" wide peg mounted up. I guess my first sighting might be in my garage. A lot of the mini racers at the nationals run his nerfs.

[ronny]

Has anyone gotten the newer ac nerfs with the netted heel guard? I was thinking about buying a set but wanted to hear something first?
Ronny

[red88r]

Originally posted by ronny
Has anyone gotten the newer ac nerfs with the netted heel guard? I was thinking about buying a set but wanted to hear something first?
Ronny

Yes I believe "VELVETCASKET" on here has. And if I remember correctly he wasn't too impressed with the fitment.

[JHF219]

Originally posted by reconracer64
i just bought a set of those ^^^^ off ebay im pretty sure they are they same lol

any chance you would want to sell them?

[reconracer64]

well they are expected to come on tuesday and if i dont like them then i might sell them but i think im really gonna like them

[97Rocks]

email sales@acracing if you want some. they are making another run of these late summer. they are currently not in stock- spoke with them today!