Race Ready 250 for sale

[sno-x139]

2008 Raptor 250

Rage motor-300cc,national porting ,cam, piston ect(33-34hp)
Lonestar Long Travel A-arms
Elka Elite Front and Rear shocks
RPM Dominator axle
Douglas Front Billet Beadlock Wheels
Douglas Rear Beadlock Wheels
*BRAND NEW OEM FRAME* Never ridden on
GYTR Nerf Bars
AC Grab Bar
Custom Aluminum Battery Box
Streamline Steering Stabilizer
Pro Taper Contour Handlebars
30mm Carb
Rage Exhuast
Rage Intake, with UNI filters
Simplified Wiring Harness

Also tons of spare parts go with, and service manual.

$5000 obo

http://i55.tinypic.com/2v865b4.jpg
http://i54.tinypic.com/2zeea06.jpg

[CamQuadRider]

What is your bottom dollar? And where are you located?

[sno-x139]

$5000 is bottom dollar. I feel this is very reasonable considering it has that much in the motor alone. As well as the suspension. Located in MI. Could bring to a national.
Jake

[CamQuadRider]

Thanks, is there any ideas on what i should do to my Engine. little far for me, I'm down here VA. And what size Tires do you run?

[sno-x139]

Send it to rage. They were the first to get big power out of these bikes, mine were the ones he built first. I already sold my race bike but this has the same motor. Run 10-18 tires, something light weight(heavy bogs these little motors way down) such as the Hoosiers, they are great tires that are light. I went through so much with these raptors and got them to the point to they were compeditive with the national 300exs. So any more questions, hit me up.
Jake

[CamQuadRider]

Thanks man and adjustable A-Arms, who has a good one, woods/mx is really what i need then for.

[sno-x139]

I guess it depends on what your looking to spend..
If you're doing an all out mx build I'd say Walsh, the geometry is amazing and it's 50in wide. I ran lonestar(they were the first to offer anything) it was great, huge improvement over stock, well priced too. Jody at jb makes great stuff to. Lsr was the only thing available when I started so I ran it, and loved it. I ran the Ella elites and fox evols with Lsr and they were both very good. Longer swing arm helps a bit to for starts(especially with 35hp in a 300lb quad :D)
Jake

[CamQuadRider]

Thanks but i really need one i can ove from like +1.5 to +3 if i wanted to. or just go with something in between.

[sno-x139]

I dont know of any a-arms that are adjustable...
Lonestar is +3. You could get wheel spacers and take them off to go to stock width, but then you will get bump steer. I don't really know what to tell you. Sorry.
Jake

[CamQuadRider]

Its all good man, thanks though! i will look into them!

[Tye 6.7]

Do not buy a bike from this guy!! He sold me his race bike and sent us a broken bike. Bad frame bad motor bad everything. I had to rebuild the entire bike from top to bottom. It had a broken case ,wore out piston and cylinder, 7 cracks in frame , every baring and bushing was wore out. The motor was not what he said. No crank ect. He also sent the wrong title and never sent the right one. All around I would never buy from this guy!! Not trust worthy. My experience was so bad I will never buy from the forum again. All and all it has cost me more then the bike is worth to fix it. The bike cost me $4500 and $5000 to repair. I GOT SCREWED !!!!!