IcutMetl
04-08-2011, 05:44 AM
So I've been going thru this red R I just bought.
The front brake discs and pads are in good shape and work, but the lever feel is very spongy. I bled all new fluid into the lines and reservoir- still spongy. No leaks.
The rear brakes were done for; reservoir was empty. I replaced the rotor and am waiting on new pads. I filled the reservoir and pumped the hell out of the pedal, but no action. No drop in fluid at all after mucho pumping. Also, no leaks.
Do I need to rebuild my master cylinders? Lines along with calipers are stock but good shape.
Pending answers, I would be interested in a rear brake reservoir or possibly an entire setup.
Thanks!
The front brake discs and pads are in good shape and work, but the lever feel is very spongy. I bled all new fluid into the lines and reservoir- still spongy. No leaks.
The rear brakes were done for; reservoir was empty. I replaced the rotor and am waiting on new pads. I filled the reservoir and pumped the hell out of the pedal, but no action. No drop in fluid at all after mucho pumping. Also, no leaks.
Do I need to rebuild my master cylinders? Lines along with calipers are stock but good shape.
Pending answers, I would be interested in a rear brake reservoir or possibly an entire setup.
Thanks!