View Full Version : 2011 Raptor 250 new take off parts
raidernut
04-04-2011, 10:01 PM
i have the following brand new take off parts from a 2011 Raptor 250. Make reasonable offers.
steering stem
rear axle
front and rear shocks
complete stock air/battery box
tie rods
drxracing
04-05-2011, 03:46 PM
You guys making the switch ?
raidernut
04-05-2011, 05:50 PM
yes
drr90#9
04-25-2011, 09:52 AM
price, pics and length eye to eye of all 3 shocks to p411m@yahoo.com please
raidernut
04-25-2011, 11:58 AM
will do this evening.
drr90#9
04-25-2011, 12:05 PM
are these the new ones with the rezzies?
raidernut
04-25-2011, 06:29 PM
no they are not. do you still want the dimensions and pictures?
drr90#9
04-25-2011, 06:42 PM
no I don't...thanks for getting back to me...good luck with the sale
quaddad#123
04-30-2011, 05:59 PM
How much for the Steering Stem?
Tie Rods ?
raidernut
04-30-2011, 08:58 PM
$60 plus shipping
quaddad#123
05-01-2011, 05:41 AM
pm sent..
raidernut
05-01-2011, 04:51 PM
pm returned
quaddad#123
05-03-2011, 01:57 PM
Did you get the shipping cost?
raidernut
05-03-2011, 02:06 PM
I apologize i am still trying to locate a box big enough for the stem, but not too big where its going to be a lot of postage. I may end up just making one out of cardboard tommarow. i will let you know.
raidernut
05-03-2011, 02:06 PM
I apologize i am still trying to locate a box big enough for the stem, but not too big where its going to be a lot of postage. I may end up just making one out of cardboard tommarow. i will let you know.
quaddad#123
05-10-2011, 06:54 PM
Got the parts today, THANKS.....
raidernut
05-10-2011, 09:20 PM
your welcome
number12
05-29-2011, 05:04 AM
PM sent
raidernut
05-30-2011, 12:06 PM
pm returned
miniquaddad90
06-15-2011, 10:42 AM
measurements on shocks? Eye to eye? Width of eyes?
thanks
raidernut
06-15-2011, 11:15 AM
not understanding width of eyes?
miniquaddad90
06-15-2011, 11:18 AM
Originally posted by raidernut
not understanding width of eyes?
How wide they are? Like how wide of opening would be needed at frame mount and at lower a-arm, looking to poss use these for a little project, not on a Yammi
raidernut
06-15-2011, 10:52 PM
ok will get measurements within the next couple of days.
raidernut
06-16-2011, 06:24 PM
front shocks are 13 1/2 inches eye to eye and they are a little more than 1 inch at the top.
miniquaddad90
06-17-2011, 06:36 AM
Rear shock measurements? Is the lower eyelets on the fronts the same with as the top?
raidernut
06-17-2011, 05:02 PM
15 1/4 length rear with 1 3/8th eye width. Front eyelets same top and bottom. the metal is 1 inch wide, and the bushings stick out a bit on both sides of the metal making it a little wider than and inch.
jp1305
06-22-2011, 08:27 AM
Hi, how much are you asking for the shocks????? Do you have a picture of them?
raidernut
06-22-2011, 10:12 AM
I can take a picture if you want. But they are just brand new 2011 Yamaha raptor 250 shocks, pulled directly off a brand new bike.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.