400ex suspension and parts, Elka, PEP, Lonestar, Houser, 450r brake setup.

[Rootar]

Ok here are some of the parts from my 400ex. Give me an hour or so to post all the stuff. Please feel free to PM me with any questions, my paypal address, and offers. Thanks

all prices are shipped and i will consider any offers.


Lonestar +2 std front end with 05' 450r spindles, hubs, calipers, rotors, +2 SS lines and 450r master cyclinder with adjustable brake lever, with custom aluminum tie-rods (required for 450r spindles) Everything you see in the picture. $450 shipped

[Rootar]

Elka Elites Std travel done by derisi racing, for +2 front end mx setup for 160-180, Ive raced the 12 hours of america on these once, rode a few crosscountry races and alot of MX, these really work great everywhere, they have 4 rides since their last service. They are in great shape, very nice set of well setup shocks.


Sold

[Rootar]

+1 1/4 Chrome swingarm, I was told this was built by Firball, Its been the strongest swingarm have owned on a 400ex (ive broke or twisited 3 others), the chrome is in decent shape and it has the front bearings and all the hardware. (it does not have skid mounts) Its a solid swingarm.

$200 shipped

[Rootar]

Houser stock length chrome stem with oversize clamp, all in great shape. $150 shipped OR $110 with out the clamp.


PEP big bottle rear shock, for +1 1/4 swingarm 170lb rider, setup with baldwin linkage linkage (not pictured) serviced about 10-15 rides ago. Great shape, Great shock, the harder you ride this the better it works!


shock is sold

[Rootar]

rezzy shot

[Rootar]

Lonstar +2+4 400ex axle, perfectly straight, chrome is good

$165 shipped

[Rootar]

Lonestar Anitfade in great shape works easy, pinches good.

$75 shipped.

[Rootar]

Sparks x-6 Exhaust, its in good shape, and sounds good, repacked not to long ago ( i will replace that one missing screw)

$260 shipped

[Rootar]

the infamous caliper ding area

[Rootar]

PM's replied

alot of nice parts here

btw i can shave alot off the prices when i combine the shipping

[curly#44]

wat would u take for front end arms shocks and rear shock and steam ley me kno pm me a price

[Rootar]

all pms replied

[Rickeybobby416]

what would you take bottom dollar for front end

[Rootar]

pm's replied

[Rootar]

Elkas are sold

lots of offers on stuff but no one has paid yet on the rest.

[Rickeybobby416]

Wouldu take 350 for the lobster a-arms alone

[Rootar]

pmd ya

[20Honda400ex00]

PM Sent

[IMSROLL450R]

Price on the rear shock without the linkage???

[nynetwo9]

Can you do $140 shipped on the axle?

I work at a honda dealership so if u use UPS its a lil cheaper shiping to a dealership.

I can paypal asap.

Thanks

[Rickeybobby416]

THATS WITH SHIPPING AND ALL RIGHT

[Rootar]

yes please check your pms rickeybobby416.

[Rootar]

nynetwo9, i sent you a PM about the axle

[Rootar]

pm's replied.

[jyd440ex]

was it you that had the carbon 250r scoops

[Rootar]

no thats smith93 i was just clarifing in his thread what scoops he actually had because he got them from me.

[jyd440ex]

thanks sorry for the mix-up

[meadows127]

I'll buy the a arms today for 225. Just the a arms, ball joints, tie rods, i dont need the rodors, spindles ext. So if you will take 225 shipped today , i will send you a payment the second i get in contct with you . Thanks. Call or txt me at 740-262-5094.

[Rootar]

the arms are sold, pending payment to Jesse.

[PaRedneckRiders]

Originally posted by Rootar
no thats smith93 i was just clarifing in his thread what scoops he actually had because he got them from me.
Sorry to go off topic but are they 250r shrouds or 400ex? I have them now but they are just sitting on a shelf haven't done anything with them yet.

[Rootar]

i already said they were for a 250R originally but they were and can be used on a 400ex.

[PaRedneckRiders]

Ok i must have missed that sry.

[Rootar]

no problem.

[Rootar]

still got a good bit of stuff left

[Rootar]

pms replied.

[Rootar]

cleaned the inbox out

thanks

[Rootar]

Lowered all the prices on page 1, lets move these out this week.

thanks

[meadows127]

Hey man, I will take the LSR A-arms, I just want the arms, i dont want the spindles or brake set up. I will give you 230 shipped for the arms with al the ball joints, ext. to put on & ride. Also any tie rods/end?
Let me know ASAP, i will buy them the second you contact me with information, thanks.
740-262-5094-Call/Txt me anytime.

[SHIFTx450]

Ross, How much of an improvement is that 450r setup on the front end of the 400ex? If you sell the a arms without the spindles and such let me know I might take them. I also received the rear shock and linkage yesterday and everything looks great. Thanks again man! Can't wait to put the setup on my Hybrid. I'm still waiting to hear back on a price for that subframe/450r fender setup. Let me know!! You have my number.

Ps. I hope all is well with y'all down there, I know some pretty nasty weather just ripped through there the last 2 days. It's all over the news up here.

[Rootar]

weather hasnt been that bad around here. Ive just had strep throat for about 2 weeks now.


I really like the 450r setup i had trouble with 400ex calipers seizing on the float pins and and not really giving me the braking i was looking for, the 450r calipers are a much better design and setup. nice smooth controled brake with all the power you want, stoppies are easy.

these stock 450r rotors and ebc pads (i thinks thats what i put on these) was better than galfer rotors and galfer pads on a good set of 400ex calipers.

I use the 450r mastercyclinder on all my bikes adjustable lever and more output over the 400ex master is great.


Meadows ill send ya a pm in a few minutes

[Rootar]

everything is back up forsale thats in the thread, updated the 1st page.

[SHIFTx450]

Ross place that front end as pending!