brake problem

[edwardsk9]

i changed out my hubs and when i went to put everything back together i now have no front brakes. i have looked at all the lines and nothing is kinked and i have bleed the brakes about 6 times per side and still have no brake pressure. any suggestions on what else to do?

[SPE_Motorsports]

There maybe be an air bubble in the line somewhere yet. Use some electrical tape or zip tie or something and pull the brake lever to the bar and keep it there over night. This should work the air out. Other wise i suggest to take your calipers and lines off and make sure ever thing is put back correctly. Just to double check your work.

[edwardsk9]

after some searching around on this site and others i found a couple of posts similar to what you said and that i worked i just had to add more fluid and bleed it a few more time. thanks for the advice.

[Hetrick Racing]

if you didnt get it yet I have to ask .Did you put the spacer on the inside of the spindle?