eton 90 bogging

[mliedel14]

do not know why it is bogging. every time I put it to full throttle it boggs. I clean the carb and not making a difference. please help

[lon]

i'd like to help but i need more info

[mliedel14]

well sometimes it does not even want to idle and just quit runing. I do not know what else to tell you.

[lon]

ok, what i meant was, is it stock ,mod. 2-stroke, 4-stroke,etc.

[mliedel14]

Its a 2 stroke engine

[lon]

its like pulling teeth trying to get info out of u. lol. have you done anything to the engine or clutch. is the pipe stock. is the carb stock. is the air filter stock. what year is it .

[mliedel14]

Iam pretty sure that everything is stock. I havent did anything to the motor and were is the clutch located. it is a 2000 I think.

[lon]

if u havent touched the clutch i would say change your rollers first, ive heard they get flat spots that will cause a bog, maybe check to make sure your pipe isnt plugged up,sometimes it will plug up at the head sometimes it will plug at the silencer,have u tried a new plug have u cleaned your air filter lately. as your sitting on the quad the clutch is on the left side, take out a bunch of screws, the kickstarter stays on the cover, pull the cover off and the clutch is right there looking at you. the rollers are in the front pulley aka the variator. you could have worn out springs in the rear clutch. once you open it up its not so bad. theres alot of really smart guys on this site, dont be afraid to ask questions

[mliedel14]

I realized that my air box was not on right where it was getting dirty air so I fix it and it stoped bogging. I really thank you for all your help and time.

[mliedel14]

thought i had it fix but i did not so compression was low so know iam rebuilding top end