BUBBA Livesay
03-20-2011, 07:30 PM
I am parting out a 2005 Honda trx450r.
Bike is all stock.
Anyone interested in some parts not listed let me know, i dont have everything listed.
I can bring parts to any MAXC race or a few select GNCC events or ship them to your door.
Prices include shipping
Rear stock shock with stock linkage $75
Stock A arms, ball joints are good, lil paint missing on the bottoms from normal riding $65
Stock Swingarm $65
Front brake setup(master cylinder, lines and calipers) $80
Rear barke setup(Master cylinder, line, caliper and brake rotor hub) $55
Wiring harness with CDI $65
Headlight $35
Condensor $10
Key switch $12
Stock steering stem, straight but lil rusty(will throw in tie rods, no ends) $25
Stock exhaust complete, lil rusty and is missing the baffle $30
Shift lever $8
gas tank with mounts but no petcock, in good shape $50
Stock hood $12
Black Plastics in decent shape with one industries graphics $50 (Prefer not to ship these! Rather bring to race.)
air box with intake boot and K&n filter(filter in rough shape) $35
Cam tower with stock cam and cam gear(bolts included, as well as the buckets $50
Cylinder (could use a replate, has slight groove at top) $35
Bumper, unknown make can post pic $30
Stock clutch pressure plate, and inner hub $make offer
DG case saver, bent a bit but still serves its purpose $5
left side case cover(stator included) 75
front and rear fender brackets $15
thanks
Brent
Bike is all stock.
Anyone interested in some parts not listed let me know, i dont have everything listed.
I can bring parts to any MAXC race or a few select GNCC events or ship them to your door.
Prices include shipping
Rear stock shock with stock linkage $75
Stock A arms, ball joints are good, lil paint missing on the bottoms from normal riding $65
Stock Swingarm $65
Front brake setup(master cylinder, lines and calipers) $80
Rear barke setup(Master cylinder, line, caliper and brake rotor hub) $55
Wiring harness with CDI $65
Headlight $35
Condensor $10
Key switch $12
Stock steering stem, straight but lil rusty(will throw in tie rods, no ends) $25
Stock exhaust complete, lil rusty and is missing the baffle $30
Shift lever $8
gas tank with mounts but no petcock, in good shape $50
Stock hood $12
Black Plastics in decent shape with one industries graphics $50 (Prefer not to ship these! Rather bring to race.)
air box with intake boot and K&n filter(filter in rough shape) $35
Cam tower with stock cam and cam gear(bolts included, as well as the buckets $50
Cylinder (could use a replate, has slight groove at top) $35
Bumper, unknown make can post pic $30
Stock clutch pressure plate, and inner hub $make offer
DG case saver, bent a bit but still serves its purpose $5
left side case cover(stator included) 75
front and rear fender brackets $15
thanks
Brent