f/a screw????

[atvextremerider]

can i pull the carb out and still need tha d shaped screw thing?:confused:

[tri5ron]

yes

[atvextremerider]

Originally posted by tri5ron
yes

where can u get it from

[tri5ron]

http://www.google.com/#sclient=psy&hl=en&q=carb%20adjustment%20tool%20d%20-double&aq=&aqi=&aql=&oq=&pbx=1&bav=on.2,or.r_gc.r_pw.&fp=6b08790fb43c8af4&pf=p&pdl=3000

[jake"08"400]

http://www.jetsrus.com/parts/tools.htm

Almost at the bottom of page. Are you can get a 99-04 f/a screw and put it in......you can take ole d shaped head out with a set of tweezers.

[honda400ex2003]

dynojet also has it too if you dont have one ordered yet.

steve

[Stark]

I used a .223 casing I had laying around. worked like a champ.

Put a flat edge on one side where the lead was, tapped it on the D with a hammer and it took the shape of the D.

Just my $.02

[atvextremerider]

Originally posted by honda400ex2003
dynojet also has it too if you dont have one ordered yet.

steve

where is it on that the web site?

[honda400ex2003]

the last i knew it wasnt on the site, you have to call and order one from them.

The part number is DT008 and comes in the new kit from DJ but you can order it separately from them for something like 10 dollars or 12 dollars.

steve