PDA

View Full Version : April Quad of the Month entry thread, XC class



TheFontMaster
03-18-2011, 06:00 PM
Ok this month's quad of the month will be specifically for quads set up for cross country racing. As always here are the rules, and the mods list.

Mods list:
http://www.exriders.com/vbb/showthread.php?s=&threadid=162941

Rules:
http://www.exriders.com/vbb/showthread.php?s=&threadid=146713

axellmusic19
03-19-2011, 08:52 PM
Chassis | Suspension | Controls:

Frame: Stock with full gussets
A Arms: stock
Swingarm: stock
Steering Stem: stock
Stbilizer: PEP
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Fly racing
Throttle/Clutch Lever: Motion pro
Grips: ODI
Nerfs: DG
Bumper: stock
Grab Bar: stock
Front Shocks: stock
Rear Shock: stock
Brake Lines: stock custom valved
Rotors F|R: stock with ebc pads
Rims F|R: ITP/stock
Tires F|R: Shredder R/A



Body:

Plastic: Carbon fiber and fiberglass and stock shaved fenders
Graphics|Seat Cover: custom by mom
Number Backgrounds:
Handguards: Steel unknown.
Bar Pad: Fly racing
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: Suzuki
Bore & Stroke: 69X70
Displacement: 255ish
Cam: N/A
Carburetor: Mikuni 38mm
Air Filter|Box: K&N custom filter and no box with Outerwears pre filter
Pipe|Silencer: FMF
Clutch|Plates: Tusk
Gearing F|R: Renthal
CDI|Killswitch: Pro Armor
Cooling|Other: Pro design cool head with 19cc dome high compression and 110 octane race gas, full port and polish, Boyseen reeds and notched cylinder and sleeve, bored .020 over and Wiseco piston kit with Hot rods connecting rod.

axellmusic19
03-19-2011, 08:59 PM
I sent in a few pictures, I realize not all are when it is in the condition as I posted in the specs but it should give a good idea of the Quad. I'm no photographer but hope you all like it.

trailrider894
03-21-2011, 10:09 AM
Originally posted by axellmusic19
I sent in a few pictures, I realize not all are when it is in the condition as I posted in the specs but it should give a good idea of the Quad. I'm no photographer but hope you all like it.

We have to see pics man... if you don't have pics you won't get voted on. Or TheFontMaster will kick you from the voting.

axellmusic19
03-21-2011, 10:23 AM
I emailed him the pictures to upload...

J250r
03-27-2011, 03:24 PM
Just go to photobucket.com and upload them.

TheFontMaster
03-27-2011, 09:55 PM
I got your pictures, I haven't uploaded them yet. I'm going to keep the entry thread open longer so that more people can enter.

XC_Racer_129
03-28-2011, 08:38 AM
2009 450ER. I didn't get to do much work to it yet, but it's plenty for the time being.

Series: B class: PA State Harescramble

Chassis | Suspension | Controls:

Frame: Stock (Orange)
A Arms: Houser LT +.5 '04/'05
Swingarm: Stock
Steering Stem: Stock (few a few more weeks)
Stbilizer: Denton
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: F: Stock '04/'05 R: Stock
Bars: Turner
Throttle/Clutch Lever: MSR Clutch lever
Grips: ProTaper
Nerfs: AC
Bumper: AC
Grab Bar: AC
Front Shocks: PEP's
Rear Shock: GT Thunder Rebuild with High Flow Piston
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Hiper
Tires F|R: Razr 2 Fronts, Razr 1 Rears



Body:

Plastic: Stock/Maier front fenders
Graphics|Seat Cover: Stock
Number Backgrounds: Attack graphics
Handguards: Powermadd
Bar Pad: Turner
Fuel Tank: Stock (soon to be clarke)



Engine|Drive System:

Cylinder|Head: Stock (Kibblewhite Vavles)
Bore & Stroke: Stock
Displacement: Stock
Cam: Stock
Carburetor: Stock
Air Filter|Box: Uni filter with no lid
Pipe|Silencer: Motoworks
Clutch|Plates: I forget the brand
Gearing F|R: Primary Drive: Stock Ratio
CDI|Killswitch: Pro Armor
Cooling: Engine Ice
Other:

XC_Racer_129
03-28-2011, 08:47 AM
Another picture:

Kendall33
03-28-2011, 12:45 PM
2010 YFZ 450X My race bike for the year, courtesy of Yamaha of Harrison and my family.

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Houser
Swingarm: Stock
Steering Stem: Stock
Stabilizer: Scotts/Dirtworks custom mount
Axle: Lonestar
Carrier: Stock
Locknut: Lonestar
Hubs F|R: Stock
Bars: Flexx
Throttle/Clutch Lever: Stock
Grips: ODI
Nerfs: Rath Racing
Bumper: Stock
Grab Bar: Dirt Works Motorsports
Front Shocks: Fox/Dirtworks
Rear Shock: Fox/Dirtworks
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Hiper
Tires F|R: Maxxis Razr w/ Tireballs



Body:

Plastic: Stock white
Graphics|Seat Cover: G4-graphics stock seat cover
Number Backgrounds: G4-graphics
Handguards: Powermadd
Bar Pad: Flexx
Fuel Tank: IMS



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: Stock
Cam: Stock
Carburetor: EFI
Air Filter|Box: Sparks
Pipe|Silencer: GYTR
Clutch|Plates: Rekluse
Gearing F|R: Stock
CDI|Killswitch: GYTR
Cooling: Liquid cooled stock
Other: GT thunder Rear skid and Chain guard, Dual-battery setup(custom), EFI controller

Pictures: http://s1112.photobucket.com/albums/k492/Kendall_Webb33/

fastredrider44
03-28-2011, 10:16 PM
Chassis | Suspension | Controls:

Frame: 05 Honda 450R
A Arms: JB XC arms, tierods
Swingarm: JB superlink
Steering Stem: JB
Stbilizer: GPR
Axle: LSR
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock powdered black
Bars: Tag
Throttle/Clutch Lever: Works connection perch/lever, stock brake
Grips: Oury
Pegs: IMS
Nerfs: Modified AC
Bumper: PRM
Grab Bar: PRM
Front Shocks: Axis Pro-Airs
Rear Shock: Axis
Brake Lines: Streamline
Rotors F|R: Stock
Rims F|R: Hipers
Tires F|R: Razr2/Razr



Body


Plastic: Stock, quadtech hood
Graphics|Seat Cover: I made 'em/Quadtech Hump
Number Backgrounds: I made them too
Handguards: Maier
Bar Pad: Tag
Fuel Tank: IMS, Tusk cap



Engine|Drive System:

Cylinder|Head: Stock/SCR Head
Bore & Stroke: Hot Rods crank, Wiseco 13.1:1
Displacement: stock
Cam: 05 HRC
Carburetor: 08 FCR/ Baldwin
Air Filter|Box: 06 up 450R UNI
Pipe|Silencer: Curtis Sparks
Clutch|Plates: Hinson Basket, factory plates
Gearing F|R: 14/38 Sunstar, D.I.D. Chain
CDI: Stock
Killswitch: Pro Design
Cooling: Stock
Other: GT Thunder sprocket guard, rotor gaurd, poly belly skid, Moose front sprocket gaurd, IMS shifter


It was dark when I took these and they kinda got washed out. I may try to snap some better pics if I have the time....

http://i215.photobucket.com/albums/cc281/fastredrider44/Rebuild/4.jpg
http://i215.photobucket.com/albums/cc281/fastredrider44/Rebuild/3.jpg
http://i215.photobucket.com/albums/cc281/fastredrider44/Rebuild/2.jpg
http://i215.photobucket.com/albums/cc281/fastredrider44/Rebuild/1.jpg
http://i215.photobucket.com/albums/cc281/fastredrider44/Rebuild/5.jpg

scotturban
03-29-2011, 09:52 PM
44 is looking good

LeGaCyGiAnT124
03-31-2011, 11:38 AM
Chassis | Suspension | Controls:

Frame: Stock powdercoated Candy Blue Translucent by Pappy with a
A Arms: Houser +.5 Standard Travel Uppers- CBT Lowers- Gloss Black
Swingarm: Stock powdercoated Gloss Black by Pappy
Steering Stem: Lonestar
Stbilizer: Precision
Axle: Durablue X-33
Carrier: Burgard
Locknut: Stock
Hubs F|R: Stock fronts powdercoated CBT and the rears are durablue
Bars: Fasst Flexx
Throttle/Clutch Lever: ASV front brake and clutch lever and a Motion Pro 1/4 Twist
Grips: Oury
Nerfs: IMS Footpegs with netted heelguards
Bumper: PRM Summit
Grab Bar: Armadillo Drop Down
Front Shocks: Axis Dual Rates revalved by MX Tech along with CBT lower springs and Gloss black uppers
Rear Shock: Stock revalved and resprung by MX Tech with a GTThunder Linkage
Brake Lines: Galfer
Rotors F|R: Galfer Wave
Rims F|R: Hiper Tech 3
Tires F|R: Front GBC X-Rex 21x7x10 Rear GBC Race-Rex 20x11x9



Body:

Plastic: OEM Honda
Graphics|Seat Cover: AOT Graphics and Quad Tech seat and cover
Number Backgrounds: 502 AOT
Handguards: Powermadd Star Series
Bar Pad: Blue Fasst Flexx
Fuel Tank: Clarke 3.9 Gallon



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 450cc
Cam: HRC
Carburetor: Rejetted to a 185 main
Air Filter|Box: Uni/Stock
Pipe|Silencer: HMF Ballance Series Slip On
Clutch|Plates: Wiseo clutch basket with EBC Clutch Kit
Gearing F|R: 13/38
CDI|Killswitch: Stock/Pro Armor
Cooling: Fluidyne Oversized Radiator with the fan hotwired to run constantly.
Other: Alba brake line clamps, LSR stem clamp, Regina Z-Ring chain, Sunstar sprockets, GTThunder Swingarm Skidplate, PRM .250 Chassis Skidplate, DG A-Arm Guards, Moose Poly Case Saver, Quadtech Hood, EBC Brake Pads, Billet Gas Cap, CV4 Radiator Hoses, Billet Front Shock Reservoir Mounts, TM Designs Chain Guide, DirtWorks Precision Linkage Arm.


http://img.photobucket.com/albums/v727/LeGaCyGiAnT124/IMG_3228.jpg

http://img.photobucket.com/albums/v727/LeGaCyGiAnT124/IMG_3226.jpg

http://img.photobucket.com/albums/v727/LeGaCyGiAnT124/IMG_3225.jpg

http://img.photobucket.com/albums/v727/LeGaCyGiAnT124/IMG_3224.jpg

http://img.photobucket.com/albums/v727/LeGaCyGiAnT124/IMG_3229.jpg

http://img.photobucket.com/albums/v727/LeGaCyGiAnT124/IMG_3231.jpg

http://img.photobucket.com/albums/v727/LeGaCyGiAnT124/IMG_3232.jpg

http://img.photobucket.com/albums/v727/LeGaCyGiAnT124/IMG_3233.jpg

http://img.photobucket.com/albums/v727/LeGaCyGiAnT124/IMG_3238.jpg

atvracin74
04-04-2011, 08:00 PM
nice bike... needs a better background and you could have my vote...