Drr Parts n Goodies

[Coley'sdad#8]

Cleaning out our toy cabinets.

(2) Maxxis razr cross tires 18x6.50x8 great tread 70.00 pr.

(2) Snow hog 16x6.50x8 on factory drr alum rolled lip wheels still good tread 100.00 pr.

(2) 19x6x10 Maxxix razr fronts great shape on factory alum drr rolled lip wheels 100.00 pr.



(2) factory drr steel rear wheels with kenda pathfinder tires never run takeoffs 50.00



(1) 90cc l/c stock engine complete with clutch cover, w/p cover, stock ignition, new piston, pin, pin brg rings not even fired after rebuild 450.00

(1) Power pro pipe w. silencer (great low end power for beginning mod's) 150.00

(1) set of stock drr shocks from 08 , ft's are red spring and rear is a black spring, takeoffs 40.00 set of 3 SOLD




(1) 2-Fast, complete, Haggerty, Slipper clutch, fresh top end, crank bearings and seals, drop in engine even has cyl radiator hose.

08 44" wide stock A-arms like new takeoffs 100.00 + ship

Stock crankshaft 50/70 bearing tight still has life 40.00 + ship



new stock floorboards and steel mounting pans FREE you pay ship


S-6 Race cylinder , head, piston, ring, pin & pin bearing, go to picture in post for details 130.00 + ship




ALL PRICES ARE PLUS SHIPPING, MY ZIP IS 37101 SO YOU CAN FIGURE YOUR OWN SHIPPING.
I DON'T RUN PAYPAL SO YOU WILL HAVE TO SEND ME A POST OFFICE MONEY ORDER OR EQUIVALENT.

Thanks

[gdr8]

Sent PM

[Coley'sdad#8]

gdr8 pm replied

Thanks

[DTRacing25]

PM'd you! Thanks

[Coley'sdad#8]

Ringtail344 - DT racing - Boilerdave71 pm's returned
D&D ring ya latr

[Coley'sdad#8]

Shocks sold - Thanks

more 2-fast info listed

[Coley'sdad#8]

JTrider, the front wheel pattern is 4/145
thanks, sent pm send me a telegraph

[heepers]

how much,who built it?
thanks
mike

[Coley'sdad#8]

sent you pm heepers

[Coley'sdad#8]

pm's replied

Hurry and get your parts Christmas is coming:D

[nastynotchback1]

pm the info on the 2-fast and the price.thanks

[fultz416ex]

i just bought a 2006 drr50. are the front lugs the same for every drr? it is the single a-arm 50. if so, can i get a pick of the front rims and tires? thanks

[Coley'sdad#8]

Yes Fultz they are
I sent you a pm

[fultz416ex]

tried to pm you back, but box is full. Is the bolt pattern 4/110 on the front rims?

[jakesdad6]

Any pic on the tires how much tread do they have the rear razr xross

[jakesdad6]

Any pic on the tires how much tread do they have the rear razr xross

[Coley'sdad#8]

Cleaned out my mailbox
My front wheel pattern is 4/145
My rears are all 4/110
will take pics this evening
jakesdad they are like new tread

[twinzmax]

CAN U SEND ME PICS OF POWER PRO PIPE

[Coley'sdad#8]

Sure Bro,
will get this evening while me and Anheiser are working in the shop:eek2:

[twinzmax]

Who makes the pipe and is it 3 pieces

[Coley'sdad#8]

John fredrickson makes it
it is a 2 pc chrome with alum silencer

[Coley'sdad#8]

Maxxis Razr Cross rears 18-6.50-8

[Coley'sdad#8]

Maxxis Razr MX Ft's with Drr Rolled wheels normal rub marks , do not leak still clean up NICE:D

[twinzmax]

Would u take $100 for power pro pipe shipped to 55371 asap

[kfx450]

pm sent

[Coley'sdad#8]

price is 150 but I will cover the shipping

[tcochraninc5]

You have a picture of the swing arm?

[tcochraninc5]

U take 100.00 shipped? Where are you located?

[tcochraninc5]

Just sent a p m to you with my phone #

[Coley'sdad#8]

sorry, this one is 125 plus shipping, new is 200 without the carrier, bearings, seals, tensioner tax or shipping
I am in Mcewen TN 37101
I figured shipping to Indianapolis and it is 15$ reg or 22 priority

[tcochraninc5]

I will pay 125.00 if you ship. I am in Princeton Indiana closer than Indy to you. Thanks let me know

[Coley'sdad#8]

can do, sent ya pm

[Coley'sdad#8]

good shape takeoffs new are 275 these are 100.00 + shipping

[Coley'sdad#8]

bearing feels good, was working fine when we put diff. cyl and crank in. 30.00 + shipping

[Coley'sdad#8]

Okay don't everybody fight over these because I know they are in high demand:D , I just hate to throw them away if someone needs them , stock floorboards with the mounting plates. these have never been installed.
FREE you just cover shipping

[Coley'sdad#8]

This is a Stage-6 race cylinder 12 pin, I bought it used, put new piston, ring, pin and s-6 pin brg in it and we have about 2 hrs on it. Somebody had done some elementary school porting on it and got into the nikasil above the exh port but the ring does not hang it. BUT LET ME MAKE IT PERFECTLY CLEAR THAT THERE IS A SMALL FLAW IN THE NIKASIL OVER THE EXH. PORT. But even if somebody wanted to get it replated it would still be a good deal @ this price.
140.00 + ship

[kfx450]

will take the crank

[Coley'sdad#8]

back to top

[gdr8]

Sent PM

[Coley'sdad#8]

Pic of 90 L/C engine, new piston, rings, pin, pin bearing, gaskets, nice looking ported koso intake, not even fired after assembly complete with stock ignition and clutching.
$450.00 PLUS shipping

[JIM GRACE]

i will take the frame saver

[Coley'sdad#8]

Thanks Jim, sent ya a pm with address

[#18dad]

ur inbox is full but payment was sent this morning

[Coley'sdad#8]

10-4 Brother and thanks, mailbox cleaned out