PDA

View Full Version : Full Race 05 TRX450R Part Out- Axis, ARS-FX, DWT, Maxxis, Flexx, Vortex Ignition+more



Britboy
03-13-2011, 04:41 PM
Full Race XC 05 TRX450R Part Out.............located in NJ
Prices include shipping to the lower 48 states,

Engine- Only has 10hrs on it since valves were replaced- Runs Strong, All stock besides a Hot Cam Stage 2 Cam. Comes with shifter, kicker (is very loose), oil cooler. Ready to bolt in and ride- $1000 shipped (will be shipped in a hard cooler - included in price)- SOLD!!!!!!!!!!!!!!!!!!!!!

Frame - comes with Title - never cracked or gussetted- in decent shape- come with subframe and grab bar- $450 shipped

ARS-FX Front End
- May possibly split shocks, a-arms, spindles etc.....but would rather sell whle right now. A-arms are in excellent shape, very little wear on powdercoat, ball joints fairly new, bushings are tight. Comes with chromoly ars-fx tie-rods and good tie-rod ends.
Custom Axis- shocks - valved by GTT for 180lbs A-rider. Lower shock eyelets are worn, need the bushing replacing (only about $20 from GTT or axis)- top ones are fine
Comes with 05 spindles, hubs and rotors in good condition, ready to bolt on and ride- $1000 shipped for whole front end

ARS-FX Rear End
- Will only sell as a complete package-
- Powdercoat is not the greatest but everything is in good shape,
- linkage - comes with skid plate, front linkage bearing has some play in it
- Custom axis shock- valved for 180lbs A-rider. Upper shock bearing has play in it and could do with switching out (only about $20 from GTT or axis)
- Comes with GTT rotor guard- only recently installed
- $800 shipped or everything

-ARS-FX + 1 inch AntiVibe Stem- zero bumpsteer- good condition with 1 1/8clamp - $175 shipped

IMS Pegs with AC Nerfs- comes with mounting hardware- in excellent shape-
$175 shipped

Douglas Billet Beadlock Shamrock Wheels- 4/1 offset fronts with Maxxis Razr 2 21inch tires approx 95% tread- possibly will split wheels from tires, but would rather sell together-
Sell for $300 shipped

Douglas Billet Beadlock Shamrock Wheels- Stock offeset- With Maxxis Razr 20inch tires approx 85% tread- possibly will split wheels from tires, but would rather sell together-
Sell for $350 shipped

Precision Stabilizer-(b clamp for ARS-FX stem and others that diameter) only has 10hrs on it- excellent shape- no play in the updated arm- $350 shipped SOLD!!!!!!!!!!!!!!!!!!!!!!!!!

GTT Dual Sprocket Guard- Only used 1 time in the sand- barely a nick on it- Excellent Shape- $100 shipped

05 Take Off Carb- BRAND NEW- $150 shipped

Flexx Bars with Powermadd Handguards installed- Good Condition- still tight, actually could do with the pins lubing. $200 shipped- SOLD!!!!!!!!!!!!!!!!!!

IMS Tank - with screw cap (dry break adaptor)- $150 shipped
05 Wire Harness- With Vortex Ignition (costs $400 alone!) has 10 power curves to choose from. Harness is complete with key switch, pro design killswitch and bar switch- Sell for $150 shipped SOLD!!!!!!!!!!!

HMF SPort Full System- in good condition- head pipe has a small dent in it- hard to even show on the pic-$175 shipped SOLD!!!!!!!!!!!!!!!!!!!!!

PRM chassis skid= $60 shipped

Front and Rear Plastics- make offers

Front Brakes- Master cylinder and front calipers-$100 shippped

Rear Brake- Master Cylinder, caliper and brake pedal- $80 shipped

Stock Throttle- good upgrade for a yamaha!- $50 shipped

MSR Quick Adjust Clutch lever and cable, in very good shape- $45 shipped SOLD!!!!!!!!!!!!!

Moose Bumper- $60 shipped

Seat $60 shipped

Axle - $60 shipped

Rear Rotor and Axle Nut- $55 shipped

05 Airbox, with HRC snorkel and modified lid- $40 shipped

Britboy
03-13-2011, 04:42 PM
rear

Britboy
03-13-2011, 04:43 PM
motor

Britboy
03-13-2011, 04:45 PM
if you want to see more pics just check out my thread over at

q u a d z o n e. c o m in the for sale section

or

email me at Atvfitness@hotmail.com

Latemodel32
03-13-2011, 04:46 PM
Does the motor still have the orginal crank and bearings in it ? Or does it have the upgraded crank/bearings

Britboy
03-13-2011, 04:50 PM
the guy i got it from said he put the new crank in- i havent been in the bottom end to confirm. As i have never had a need to ...the bike runs strong and has low hours

williams_179
03-13-2011, 04:58 PM
do have pics of wiring and box

Britboy
03-13-2011, 05:09 PM
Harness/Vortex is sold!

jonclark180
03-13-2011, 05:49 PM
email sent on front end!

meadows127
03-13-2011, 07:42 PM
I need pics of the plastics, exhaust and flexx bars to racerforlife@live.com or 740-262-5094.
I wan this stuff asap thanks.

rookiewrench
03-14-2011, 05:42 AM
if you decide to split the front end let me know what you want for the spindles,hubs,and rotors. thanks

SMR TEAM
03-14-2011, 11:16 AM
how much for just the front axis?? whats the length on them ?

Britboy
03-14-2011, 12:39 PM
Originally posted by meadows127
I need pics of the plastics, exhaust and flexx bars to racerforlife@live.com or 740-262-5094.
I wan this stuff asap thanks.

I have the exhaust and rear fenders left but sold the other stuff you wanted

jonclark180
03-15-2011, 08:23 AM
did you get my email about the plastics??
ill take them

Britboy
03-15-2011, 12:41 PM
Originally posted by jonclark180
did you get my email about the plastics??
ill take them

i have the fronts sold- i have the rear avaiable

or i acutally have a full set of red plastics in good shape with a white Fibe Industries hoodf from my 08 kicker bike from last season. let me know if you would be interested in them

marinenyc
03-15-2011, 11:27 PM
What color is the tank? Pic please.

Britboy
03-16-2011, 09:06 AM
Originally posted by marinenyc
What color is the tank? Pic please.

tank is sold

dunkfan_19
04-11-2011, 06:46 AM
I know the post is about a month old but what's the status on the Ars-fx stuff ?