PDA

View Full Version : way too much stuff...


trx293pv
03-09-2011, 02:31 PM
feel free to make offers on any or all of these items. first up, perfectly good YFZ 450 calipers with new pads
trx293pv
03-09-2011, 02:33 PM
set of cases with transmission, saver mounts intact
no crank
trx293pv
03-09-2011, 02:38 PM
great motor, nice midrange port job, race gas required, specify how much of it you want when making offer. have rad valve, 38PJ, full ignition system, hyd. clutch, anything else you see in photo. This was on the Roll quad I had. this motor is stout
trx293pv
03-09-2011, 02:40 PM
works rear shock. 16 1/4" eye to eye. needs a new bushing up top
trx293pv
03-09-2011, 02:42 PM
some kind of MX axle. straight, sprocket hub loose, comes with one that isn't loose
trx293pv
03-09-2011, 02:43 PM
nice 86 cylinder, needs to be bored. it was at 68mm not much in the way of porting
trx293pv
03-09-2011, 02:46 PM
87 cylinder. could use a hone job. has been ported. don't know how big it is.
trx293pv
03-09-2011, 02:47 PM
88 cylinder. cross hatch still visible, don't know how big this one is, some porting but not much
trx293pv
03-09-2011, 02:50 PM
left case only damage is in the photo
trx293pv
03-09-2011, 02:50 PM
right case ..good
trx293pv
03-09-2011, 02:51 PM
box of various transmission parts
trx293pv
03-09-2011, 02:52 PM
radiator and associated items
trx293pv
03-09-2011, 02:55 PM
here's the big picture. also type six pipe. (not you croat ..yours is on my bike at the shop), blue rear fenders, DG bumper, etc, etc.
sameltoe
03-09-2011, 03:00 PM
Would you seperate the hydralic clutch set-up?
curly#44
03-09-2011, 03:04 PM
pm me a package deal price on everything i got cash money nd im ready to buy pm me if ur willin to sell everything at one pop
latheboy
03-09-2011, 03:31 PM
Do you have a coolant bottle?
wilkin250r
03-09-2011, 03:54 PM
Originally posted by trx293pv
87 cylinder. could use a hone job. has been ported. don't know how big it is.

Talk to me about this one. What kind of porting, do you know who did it?

Along with all my other various plans and directions, I am DYING to get into porting, and I want to get examples of various port jobs. I have my own theories and strategies, but it's always nice to see other examples and maybe learn a thing or two.
TheRealFatShady
03-09-2011, 05:33 PM
Price of shock? Thanks
fourtrax_r
03-09-2011, 06:37 PM
price on any and all trans parts you are selling
thanks
latheboy
03-09-2011, 07:56 PM
bump
MANIAK 88R
03-09-2011, 09:12 PM
WTF is up with the swamp mud all over the engine and that bright shiny new looking clutch slave?

What brand is that hyd clutch?
dirtycj5
03-10-2011, 12:26 AM
Pm sent
trx293pv
03-12-2011, 09:54 AM
still taking offers...

hyd. clutch - sold

thanks
PaRedneckRiders
03-12-2011, 11:30 AM
How much you looking to get for the yfz calipers??
trx293pv
03-12-2011, 05:11 PM
please MAKE AN OFFER if you'd like any of these items. thanks

for example someone offered me 100 for my clutch and i accepted it and someone offered me 40 for the calipers and i didn't accept it.
trx293pv
03-14-2011, 09:00 AM
alright... starting to get somewhere.

moved out a lot of the odds and ends this weekend. all that's left is

1. works rear shock - needs upper bushing
2. mx axle - comes with tight hub as shown
3. three motors for parts (prefer to sell as a unit) 812-249-0881
4. blue rear fenders/hood - no cracks
5. yfz calipers - new pads
sameltoe
03-18-2011, 05:13 PM
Got the hyd. clutch!


Was the master cylinder leaking when you sent it?
...is now lol
trx293pv
03-18-2011, 08:19 PM
was not. Is the little bleeder tight?