white brothers cam?

[supertrooper90]

Does anyone know the valve clearance spec or where I could even find info on what the proper valve clearance is on white brothers cams?

[JRN2786]

this might help
http://www.exriders.com/vbb/showthread.php?s=&threadid=237131

[supertrooper90]

lots of informative reading but nothing on the actual valve clearance thanks

[JRN2786]

Have you tried calling white brothers? i called hotcams and he emailed me all the specs and valve clearances for my cam. I would think WB would do the same

[PaRedneckRiders]

Originally posted by JRN2786
Have you tried calling white brothers? i called hotcams and he emailed me all the specs and valve clearances for my cam. I would think WB would do the same
White brothers went out of business well they were bought out.

[JRN2786]

Well that aint gonna work then is it. If its the WB track cam coulndt you use the web 450/451 or GT thunder specs? it has the same cut.

[supertrooper90]

Hence the reason for this thread. I was hoping to run into some old school guy that might have the specs. since nothing seems to be popping up, i guess I will just follow the stock clearances since that chart notes only hot cams need special clearances

[JRN2786]

Well good luck man. Sorry I couldn't help

[crownandmonster]

I think you should be fine running stock specs. Hot cams only need to be broken in on their specs and then can be ran on stock clearances.