PDA

View Full Version : ***Help help quick**


J25
02-16-2003, 02:54 PM
i have an electrical problem, ok theres a white plug underneth the hood of the 400ex , well i replaced that with a plug from napa....everything is workin good.... i went to turn it off, i turned the key too off and the lights and neutral light turned off but the engine kept running, whats wrong?
J25
02-16-2003, 03:08 PM
pllleeeeeeeezz someone help!!!!!!!!!!!!!!!!!!!!!!!!!
02-16-2003, 03:23 PM
:huh wow i don't know someone help him out!
jerry-89-250R
02-16-2003, 03:41 PM
how many wires did you cut too put the new plug on? are you sure you hooked them up right?
300EX_HMF
02-16-2003, 03:44 PM
so uhhhhh...... is it still running right now?
just turn the gas off and then fix your electrical problem.
J25
02-16-2003, 03:47 PM
jus 3 and they all good? the plug i got, there 6 metal prongs, 3 for one side 3 for the other, then they slide in the plug and the plug slides together, could maybe 1 of these 3 wires not be touchin
J25
02-16-2003, 03:49 PM
i used the the kill switch, i would fix it if i new how :rolleyes:

thas why i made the post cuz i didnt no what to do
J25
02-16-2003, 04:57 PM
bump
J25
02-16-2003, 06:59 PM
pleez
jerry-89-250R
02-16-2003, 07:39 PM
check the 2 black wires you cut and put in the new plug, one of them has a white stripe, make sure you didn't cross them when you put the plug on, solid black-solid black, black w/white stripe-black w/white stripe, i think that's your problem
Narly R
02-16-2003, 07:46 PM
On our old timberwolf there was a wire at the bottom of the engine and it would pop off and cause the neutral light to come off. Look and see if you have anything not connected at the bottom of your engine. Prolly not your problem but ya never know!
Chanman420q
02-16-2003, 07:51 PM
does the elec start still work without the key?
J25
02-16-2003, 08:10 PM
nope
300exazzkikr
02-16-2003, 10:06 PM
i'm not electrical expert but it sounds like a bad ground somewhere.
02-17-2003, 08:56 AM
You do NOT have all the wires under the hood ran and connected properly...I had the same problem.. You need to go back over every wire and double check it..that's your problem..
J25
02-17-2003, 03:30 PM
what wires did u have wrong
jerry-89-250R
02-17-2003, 04:11 PM
your wires are color-coded, check them, u have something crossed, or take the plug back out and hook the up without the plug, black to black etc.