Easy Question

[trx400exrider14]

i got new boots and theyre thick,so do i adjust the shifter on a 400ex to shift easier?

[PaRedneckRiders]

Originally posted by trx400exrider14
i got new boots and theyre thick,so do i adjust the shifter on a 400ex to shift easier?
Are you asking how??

Just pull the shifter off and turn it some then put it back on so the front of the shifter if up higher so you can get your boot under it.

[trx400exrider14]

how do i take it off,i got the bolt off the top of it,but it still doesnt come off

[PaRedneckRiders]

put a screw driver in between the back two pieces that screw together to hold it on pry it apart just a little then jiggle it off.

[trx400exrider14]

it seems though that the shifter is one piece though,is it pretty hard to pry off cause im having a good time trying

[PaRedneckRiders]

the shifter should not be one piece.
Post a picture if you can.

[trx400exrider14]

it might be dry dirt,lemme go check again and ill get back with you

[trx400exrider14]

i tried to pry it a little bit,and i wiggled it and nothing came loose or anything,and ive pried it a good bit

[01boneless]

spray some wd 40 or some type of oil on it and try tomarrow put a flat head screw driver between the split in the shifter (where the bolt runs threw) and pry a little and pull if it dont come off ?? try heating it i guess??

[CJM]

Your not gonna break it, get a really hefty screwdriver and pry it where the split is and yank it off.

[trailrider894]

You have to take the screw all the way out...

[trx400exrider14]

haha,i got it,yea wd-40 was all it needed,fixed it now,but still a little hard to get used to