PDA

View Full Version : changing it up some- rebuild 2011


looke83
03-01-2011, 08:48 PM
heres just some pics i took of me rebuilding my 2009 races quad. my biggest change this year is the exhaust. i like having my quad looking unique, so here it is.
looke83
03-01-2011, 08:48 PM
i tore down the motor and put in all new bearings inside the cases
looke83
03-01-2011, 08:50 PM
.
looke83
03-01-2011, 08:51 PM
heres the exhaust after i was done welding it. i used my practice quad to mock up how it was going to work out.
looke83
03-01-2011, 08:59 PM
.
looke83
03-01-2011, 09:01 PM
heres how much i have together up to this point.
scotturban
03-01-2011, 09:38 PM
Will an ltr intake and filter just mount right on?
looke83
03-01-2011, 09:49 PM
when fuel atv came out with there intake kit like 2 years ago they were using the ltr 450 intake and attaching it to the small 3" long tube coming off the throtle body. i have that 3 inch piece clamped to a piece of exhaust pipe, then clamped to the ltr intake, its a bit crude for now, but its all i could get to work.i would like to build an aluminum intake tube eventually for it, i just didnt have the time right now.
spanky101
03-02-2011, 10:52 AM
Definatly unique man!
BLU82
03-02-2011, 06:58 PM
Defiantly unique, but your intake air temp is going way up with a set up like that. Not sure if it will be enough to make a change in power, but it's possible. Looks sick though! And what kind of engine stand is that?
ALXKFX450R
03-02-2011, 07:05 PM
Looks good keep us posted!
looke83
03-02-2011, 09:47 PM
the way i have it set up i will be fine, it wont be any hotter then a suzuki. lol and the motor stand i built my self, ill have more pictures to put up next week probably
Kawie450r
03-03-2011, 04:08 PM
lookin good and different lol
cant wait for more pics
motomxman450
03-12-2011, 10:07 AM
Did u check clearence on the swinger? Looks like one hard hit will smash the can.
looke83
03-13-2011, 08:18 PM
when i was designing the pipe and the mounts i used measurements off the air box the was previously in there, the lowest point on the exhaust is the exact same as what the air box was, and that never hit before, its all assembled now, and with someone jumping on the sub frame that weighed 220 lbs had nothing even close to touching. heres some more pics, i have a couple more things im waiting to get before its completely done for this year.
looke83
03-13-2011, 08:22 PM
.
looke83
03-13-2011, 08:24 PM
..
looke83
03-13-2011, 08:25 PM
,
looke83
03-13-2011, 08:26 PM
'
looke83
03-13-2011, 08:28 PM
.
Kawie450r
03-13-2011, 08:31 PM
That looks so sick dude!!! Nice work.
twincat800
03-16-2011, 08:38 PM
Seems like its just going to suck in hot air coming from the exhaust
twincat800
03-16-2011, 08:38 PM
Seems like its just going to suck in hot air coming from the exhaust
looke83
03-16-2011, 10:37 PM
do the ltrs suck in hot air ?
looke83
03-20-2011, 07:19 PM
its done. i ended up having to modify my air box some more to get more air it, and also modify my seat.
looke83
03-20-2011, 07:20 PM
..
looke83
03-20-2011, 07:26 PM
,.
looke83
03-20-2011, 07:32 PM
;
looke83
03-20-2011, 07:33 PM
.
scotturban
03-21-2011, 08:52 AM
looks real good what races do you race?
looke83
03-21-2011, 11:33 AM
im from NS, Canada. i Race in the Atlantic series, which is just eastern canada, but i want to go to some NEATV races this year.
al capone
03-26-2011, 01:27 PM
WOW is all I can say. You are a genius.
reconmaster
03-26-2011, 06:32 PM
great work daniel...what kind of piston do you run? whats done to the motor? is your track ready