PDA

View Full Version : Lot of 400ex Parts



f4istunna
02-26-2011, 05:46 PM
I have quite a few 99-04 400ex parts im looking to sell. I only have whats listed no other 400ex parts. Located in ne ohio can pickup with cash, or will ship. I accept money order or paypal. Accepting reasonable offers on everything.
Updated list 3-22-11


Stator Cover
Good working Stator with mounting hardware
Clutch cover
Clutch push rod
Clutch plates and springs
Durablue adjustable shock linkage
Rear brake stay (caliper mount)
Intake boot (carb-engine)
Stock axle locknut
Gas tank mounting straps
Oil tank with cooler and lines (bottom of tank jbweld)
Chain and sprocket set oring, 38 t rear 15 front
Stock front brake lines
Left and Right spindles
aftermarket (cast aluminum) rear wheel hubs
Regulator rectifier
Battery box
Shifter lever
Stock case saver
Red gas tank cover (small hole from bars)
All gears inside the sidecovers
Seat latch assembly
complete seat with latch good pan and foam could use new cover
Subframe rubber grommets for seat
Rear fender support (goes under seat)
Battery mounting strap
Folding shifters
Ignition switch with key (end/plug is cut off just wire in or use your old plug if you have a bad switch)
LSR greasable billet axle carrier ( probably needs bearings)
Stock tierod ( 1 ) with ends
Crankcase breather box and hoses
Steering stem clamp

nealrod
02-27-2011, 03:55 AM
I could use the o ring chain and the threaded inserts for the exhaust on the subframe. Pm me your best price shipped to KY 42215 thanks

f4istunna
02-27-2011, 08:24 AM
sent u a pm let me know

thanks

wakaa06
02-27-2011, 12:46 PM
You wouldn't happen to have a head would you?

f4istunna
02-27-2011, 12:49 PM
just have whats on the list sorry

yonsracing
02-28-2011, 05:58 AM
how much for the cam guides and chain?

do you have a inner clutch basket?

f4istunna
02-28-2011, 08:41 AM
all i have left for the clutch are set of used oem steels/fibers and a cpl actuator arms
make me an offer on the cam chain, guides and tensioner.

meadows127
02-28-2011, 04:50 PM
How much for the transmission?
Call/ txt 740-262-5094 if you want . Thanks

f4istunna
02-28-2011, 05:01 PM
id take $60 shipped

meadows127
02-28-2011, 06:30 PM
What all does it include?

f4istunna
02-28-2011, 07:16 PM
main and countershafts with all gears and washers/hardware.

yonsracing
03-01-2011, 02:55 AM
50.00 shipped for the cam guides and stuff.

f4istunna
03-01-2011, 07:40 AM
ya sounds fair. ill pm you my info

thanks

rd2005
03-01-2011, 09:14 PM
How much for the battery box, airbox lid, cdi, & ignition coil/plug wire shipped to 37659??? Thanks

f4istunna
03-02-2011, 07:17 AM
i dont have the airbox lid only the clamps for it.

make me an offer on batterybox, cdi and coil

thanks

f4istunna
03-05-2011, 11:21 AM
sold a few list on first page updated

f4istunna
03-08-2011, 09:53 AM
cam tensioner, guides and chain sold

f4istunna
03-22-2011, 12:50 PM
this is whats left as of today


Stator Cover
Good working Stator with mounting hardware
Clutch cover
Clutch push rod
Clutch plates and springs
Durablue adjustable shock linkage
Rear brake stay (caliper mount)
Intake boot (carb-engine)
Stock axle locknut
Gas tank mounting straps
Oil tank with cooler and lines (bottom of tank jbweld)
Chain and sprocket set oring, 38 t rear 15 front
Stock front brake lines
Left and Right spindles
aftermarket (cast aluminum) rear wheel hubs
Regulator rectifier
Battery box
Shifter lever
Stock case saver
Red gas tank cover (small hole from bars)
All gears inside the sidecovers
Seat latch assembly
complete seat with latch good pan and foam could use new cover
Subframe rubber grommets for seat
Rear fender support (goes under seat)
Battery mounting strap
Folding shifters
Ignition switch with key (end/plug is cut off just wire in or use your old plug if you have a bad switch)
LSR greasable billet axle carrier ( probably needs bearings)
Stock tierod ( 1 ) with ends
Crankcase breather box and hoses
Steering stem clamp

meadows127
03-23-2011, 04:56 PM
is the link tt?

IMSROLL450R
03-23-2011, 06:19 PM
I need a shifter lever what are you folding ones? Pics? Paypal ready. 620 429 0257, can text me if you want.

f4istunna
03-23-2011, 06:34 PM
meadows its the durablue adjustable linkage.


Ims Im not sure what brand they are. I can get some pics of it.

IMSROLL450R
03-23-2011, 06:41 PM
Originally posted by f4istunna
meadows its the durablue adjustable linkage.


Ims Im not sure what brand they are. I can get some pics of it.

thanks dude.

f4istunna
03-24-2011, 08:26 AM
i have more shifters than i remembered lol

f4istunna
03-24-2011, 08:30 AM
let me know if interested in any of them. the folding theres a shorter one and 2 longer.

IMSROLL450R
03-24-2011, 11:39 AM
Can I get the 3rd one from the top and the 2nd one from the bottom in the 1st picture? That make sense? How much shipped to 62561? Can paypal ASAP.

f4istunna
03-24-2011, 02:14 PM
ok so the one stock one (with good paint) 3rd shifter down. And the folding one in the middle of the 3 folding style shifters right? (next to last in pic).

$25 shipped sound good?

01boneless
03-24-2011, 02:37 PM
how much for the bottom folding shifter and what brand?

IMSROLL450R
03-24-2011, 06:58 PM
Originally posted by f4istunna
ok so the one stock one (with good paint) 3rd shifter down. And the folding one in the middle of the 3 folding style shifters right? (next to last in pic).

$25 shipped sound good?

All I need is a paypal buddy..... :)

f4istunna
03-24-2011, 09:16 PM
ims pm'd you my paypal


boneless i have no clue what brand.

should be able to get it to you for 15 or 16 shippedf

arsenal35
03-27-2011, 03:35 PM
Do you have a swing arm I'm interested if you do let me know thanks

IMSROLL450R
03-28-2011, 06:22 PM
Got the shifters today!!! Talk about fast! Great Seller here fellas!!!!!

Thanks a lot man.

Free bump.

f4istunna
03-28-2011, 08:19 PM
thanks dude glad your happy

f4istunna
04-05-2011, 06:54 AM
still have a box of parts left id like to get rid of

Stator Cover
Good working Stator with mounting hardware
Clutch cover
Clutch push rod
Clutch plates and springs
Durablue adjustable shock linkage
Rear brake stay (caliper mount)
Intake boot (carb-engine)
Stock axle locknut
Gas tank mounting straps
Oil tank with cooler and lines (bottom of tank jbweld)
Chain and sprocket set oring, 38 t rear 15 front
Stock front brake lines
Left and Right spindles
aftermarket (cast aluminum) rear wheel hubs
Regulator rectifier
Battery box
Shifter lever
Stock case saver
Red gas tank cover (small hole from bars)
All gears inside the sidecovers
Seat latch assembly
complete seat with latch good pan and foam could use new cover
Subframe rubber grommets for seat
Rear fender support (goes under seat)
Battery mounting strap
Folding shifters
Stock tierod ( 1 ) with ends
Crankcase breather box and hoses
Steering stem clamp