711racer
02-24-2011, 06:09 PM
I have an 05 450R set up for MX. The problem Im having is reaching when turning while leaning to the opposite side of the bike. I have 32" Fasst Flexx bars and did have an aftermarket throttle which was about 1/2" wider than a stock that i put on and allows me to slide everything in closer for better feel as far as reach and leaning (while sitting in the building).
Now the issue that Im having is the front brake lever is out to far for me to grab with my fingers. There ASV levers, the left side is not a problem, just the right side with throttle and brake reservoir being so bulky. I thought about taking the brake lever to a friend at a machine shop and seeing if he could machine the piece that the lever actually mounts to and make it a little narrower.
ANY help at all would be GREATLY APPRECIATED
Now the issue that Im having is the front brake lever is out to far for me to grab with my fingers. There ASV levers, the left side is not a problem, just the right side with throttle and brake reservoir being so bulky. I thought about taking the brake lever to a friend at a machine shop and seeing if he could machine the piece that the lever actually mounts to and make it a little narrower.
ANY help at all would be GREATLY APPRECIATED