Anti-Vibe Stem - Where to get Replacement Parts ?

[Langbolt]

Does Anyone know where to get the Rubber Cones for the Anti-Vibe Steering stems ?

Is this an Automotive part that has been used for our Quads ?

Any help would be appreciated

:devil:

[C41Xracer]

i need some too

[croat1]

red urethane bushings from Energy Suspensions in California. the part number is #9029R

this is some info i rec'd years ago from a chassis builder. i will or someone please look it up to verify.

[Langbolt]

Hey Croat1,

I went to there website and couldn't find that Part#

Do you know what it was used for ? Make/model etc

:devil:

[gixxerbob]

for my houser stem i called them directly, it was 3$ a piece. make sure to order the 250r cones though.

http://www.houser-racing.com/ProductDetail.jsp?LISTID=5010000-1122933595

[wilkin250r]

Most often the manufacturer will sell them, and they're fairly cheap. But they probably don't list them on the website or anything, they just list the all the big stuff, so you'll have to call them directly.

[croat1]

i found an old file folder with some notes: the part number i mentioned is a special/non stock item. order qty. is 1000 minimum. when i did call (years ago) they questioned where i got the part number from.

like others have stated our best bet is just to order from the stem manufacturer.

joe

[Langbolt]

Yeah....that's what I figured....I just didn't want to pay more for shipping than the item is worth! LOL

Or find someone local.....I'm gonna try a Wine Supply shop....they have Rubber Stoppers that are really close....#4 is the size I'm gonna check

:devil:

[MANIAK 88R]

Go to AutoZone/ O-rieleys/ Kragen/ Napa
OK, basically any nationwide autoparts store should carry these.

Look for poly universal swaybar end-links or specifically an endlink set for an 88-98 k1500 Chevy.

I discovered that the bushing in my stem were the same bushings used in the end link kit. I bought the kit from autozone. It is an energysuspension kit and the bushings are 100% correct in my fireball and my houser stems.

[Langbolt]

AWESOME!!!

Thanks Maniak 88R

I'll check that out!

:devil:

[2000ex]

I believe they are also cr500 or cr250 rubber triple tree bar mounts that they used originally.

[Langbolt]

Yeah I looked into that too!

Honda Part# 53133-KA3-832

It's used on the Cr250, Cr500 and even the CRF450R

That'll be next if the #4 Rubber stoppers I got from LOWES don't work!

:devil: