Laeger Pro-Trax T-pin Rebuild

[Langbolt]

Here's an exploded view with replacement Part #'s

[steve250r]

Nice Work!

[troybilt]

The mods need to sticky this, and keep this thread for T-pin rebuild information!!!

[danhung11]

Everyone with information regarding ProTrax stuff, should send it to Langbolt to include on the original post. That way, we can keep this thread clean with the meat up top.

Sorry to volunteer you Langbolt, but you started it. :p

I will keep everyone posted as to what I find out about the clevis deal.

[TLR-Online]

If you guys dont mind... i would like to save all this and make a thread on my forum about it!

I know there was a few threads about replacement parts, ect. I need to go back and find those and combine it all into 1 thread.

Great work!

[Langbolt]

No problem guys!

Just send me the info and I can update the JPG

Sorry it took me this long to get it posted!

:D

[number5]

sbb-10 the heim bearing?

[Langbolt]

Number5....see in the Diagram

The SBB-10 is what is referred to as the MONO-BALL bearings.

It's the Upper & Lower T-pin Bearing.

Are you looking for the Heim joints on the Tie-Rods ?

:devil:

[rayman375]

Who makes this stuff? Do you get the parts from Laeger or somewhere else?

[number5]

Originally posted by Langbolt
Number5....see in the Diagram

The SBB-10 is what is referred to as the MONO-BALL bearings.

It's the Upper & Lower T-pin Bearing.

Are you looking for the Heim joints on the Tie-Rods ?

:devil:


yes I need those too. I remember buying some about 4 years ago form my tie rods but they are wore out now. I dont remember where I got them. I really need just to do the everything since season is over down here.

[danhung11]

Originally posted by number5
yes I need those too. I remember buying some about 4 years ago form my tie rods but they are wore out now. I dont remember where I got them. I really need just to do the everything since season is over down here.

Contact Rod End Supply in Olathe, KS. The rod ends are X-7 and XL-7. Does not come with the jam nuts. I have new ones if you need jam nuts. The part #'s listed are L & R hand threads. You'll need 2 of each.

[brokenbones]

the tie rods are pmx7

7/16th x 20 lh or rh from tie rod supply

[brokenbones]

this is from baldwin motorsports invoice

lae018g spindle upper bearing nax1725z
lae 018m is the roll pin

[danhung11]

Originally posted by brokenbones
this is from baldwin motorsports invoice

lae018g spindle upper bearing nax1725z
lae 018m is the roll pin

Do you know who the supplier is? Looks like those are sourced from Laeger with the first three letters...:ermm:

[Langbolt]

Hey Dan I think what brokenbones is saying is the Laeger Part number is LAE018G which equates to the IKO bearing Part#NAX1725z....but I'm confused on the ROLL PIN ? LAE 018M....is that the spring pin that hold the upper and lower clevis locked in place ? The one that you have to drive out before you can disassemble the T-Pins....
:devil:

[brokenbones]

well about 5or 6 years ago I bought a box full of all the parts to rebuild both of my front ends. I know susie was still answering the phone if thats a time line. I will look through all my old invoices and try to help with numbers,I looked in the box last night to try to find parts numbers on the bags but there were not any. I did find a 2006 laeger parts catalog in the box and it shows very few rebuild parts and still no numbers, I dont know how to post pics but I can send a pic to some to post if the want to see the catalog

2cents

[250R-Dee]

I added it to the tech stickies.

[danhung11]

Originally posted by brokenbones
well about 5or 6 years ago I bought a box full of all the parts to rebuild both of my front ends. I know susie was still answering the phone if thats a time line. I will look through all my old invoices and try to help with numbers,I looked in the box last night to try to find parts numbers on the bags but there were not any. I did find a 2006 laeger parts catalog in the box and it shows very few rebuild parts and still no numbers, I dont know how to post pics but I can send a pic to some to post if the want to see the catalog

2cents

pics please... danhung11@gmail.com.

Thanks,
Dan

[brokenbones]

pics coming

[stever250r]

Originally posted by brokenbones
the tie rods are pmx7

7/16th x 20 lh or rh from tie rod supply

The PMX-7 tie Rod ends require lubrication....

You can also get the "XM" series which are the self lubricating Rod Ends... " Teflon Liner " $ 11.62 each..

XM-7 Right Hand Thread
XML-7 Left Hand Thread.

The Website has this part number listed as 5/16, but I called today and that information is incorrect.. .They are the 7/16 X 20.. Same as the PMX series, but with Teflon Liners...

Thanks Dan :D

[hawaiiysr]

Found this while doing a beach. Thought it would be helpful here.

http://www.trx250r.net/trx250rforums/index.php?showtopic=5970&hl=aarm

[bigmatt61]

Are anyone else's mono-ball bearings aluminum? I think I have a "custom engineered" part, if you know what I mean.

Matt

[Langbolt]

Bigmatt61 - Aluminum ???

I hope you can simply swap them out for the IKO SBB-10's

They're all Steel and about $8 ea from a bearing supplier

:devil:

[number5]

what size zerk fittings are in the rod ends? I have never seen em that small.

[troybilt]

Has anyone cross referenced these bearings to a McMaster Carr bearing or other? besides IKO bearings....

IKO NBX 1725Z
IKO TZ 1725Z

[troybilt]

Found this from Consolidated:

[Langbolt]

Hey Troy! Good find! Have you checked the Price on these ? I know the IKO's are expensive... :)

[troybilt]

So far the cheapest is just ordering thru Laeger at 52 bucks ea. The SKF's were 126 and warehoused in Germany only. I've called around all over.

[Langbolt]

I paid $86ea up here in the Great White North.....they have a Warehouse in Toronto....I wonder How Laeger gets them so cheap ? Unless he has a relative in Germany ? LOL

[SICK-250RZS]

Contact Rod End Supply in Olathe, KS. The rod ends are X-7 and XL-7. Does not come with the jam nuts. I have new ones if you need jam nuts. The part #'s listed are L & R hand threads. You'll need 2 of each.


Does anyone have a price on these rose joints?

[Langbolt]

SICK-250Rzs,

you'll have to call Rod End Supply.....you could source them elsewhere....but you'll end up replacing them a lot sooner if you buy cheap ones.

I recommend: www.fkrodends.com

:)