Size and pitch of swing arm

[Balaz_73*00]

Im confused as hell right now. Got everything powder coated and of course some over spray got in the 4 bolt holes that clamp down on the carrier. Went to run a die over the bolts just to make sure I run the correct tap in the swinger and none of the metric dies Im using fit. I have a complete set and used a M8 1.0 and M8 1.25 thinking itd def be one of those. Almost seems as if its a standard thread? Any help is appreciated

[diangelo#67]

if its stock yeah should be metric, But everybody I know who makes aftermarket swingers uses std.

[DnB_racing]

Originally posted by Balaz_73*00
Im confused as hell right now. Got everything powder coated and of course some over spray got in the 4 bolt holes that clamp down on the carrier. Went to run a die over the bolts just to make sure I run the correct tap in the swinger and none of the metric dies Im using fit. I have a complete set and used a M8 1.0 and M8 1.25 thinking itd def be one of those. Almost seems as if its a standard thread? Any help is appreciated i think its a m8x.75x40

[Balaz_73*00]

Wow a .75 pitch on a M8? didnt know that existed...il have to see if anyone I know has that size. Thanks