PDA

View Full Version : 05 fcr carb jetting



nizzer450r
02-13-2011, 09:37 AM
put fcr carb on my 05 450r off of a crf , cant get it running right . when i back off throttle it doesnt return to idle straight away!

162 main
50 pilot

everything is clean and clear help!!!!

robinson446
02-13-2011, 10:27 AM
you have an air leak or pilot jet is not set

fastredrider44
02-13-2011, 06:52 PM
That seems like a small main to me, but it wouldn't cause it not to return to idle quick. Air leak and pilot are possible causes, or your throttle cable is in a bind, worn out, or not a stiff enough spring on the slide.

midwi
02-13-2011, 11:03 PM
The 50 pilot seems too high. Try a 48 or 45 depending on how modded your motor, exhaust and intake are.

brewster426
02-16-2011, 05:24 PM
i have a 175 main with stock exhaust and air box lid off

Fast470r
02-23-2011, 11:19 AM
Ive got a size 50 pilot in my fcr and still seems to glow at idle but i think your main is to lean im running a 178. and dont forget the leak jet

eastside 400
02-24-2011, 03:53 PM
with aftermarket pipe, and air box lid off, jetting should be 172-178 main with a 45-48 pilot, fuel screw 2 1/2 out and i usually run a OBEKR needle. and a 55 leak jet. are you sure your fuel screw is installed properly with the Oring and washer?