06+ honda throttle picture???

[kx515]

Does anyone have a picture of the inside of an 06 honda 450 throttle housing. I bought a ktm 450 and it has a honda thumb throttle and I'm having issues with the throttle hanging and not wanting to return to normal idle. I was wanting to see the inside of the housing to make sure it is put together properly. If you had a list of parts that go inside the housing that would help also.

[Colby@C&DRacing]

is it an 06 or 04/05 throttle?

[kx515]

Colby, its an 06. I guess with the 06+ throttle you can use the two tors wires and wire them up directly with the 06+ honda throttle. The reason for going this route is because of the throw angle on the 08 ktm thumb throttle. I've heard you can use a relay switch that someone sells but can't find the website. Do you have any experience with this?

Thanks for the reply. I might call you about it later if I get time.

[Colby@C&DRacing]

the nut that holds the thumb throttle might be to tight. I just did this on a ktm but I used the 04/05. Give me a call if you have any other questions.