Miscellaneous parts for sell

[quad2xtreme]

Fly start button/Pro Design killswitch (used) - already wired for 2006+ 450er (with key setup) - $25 + $5 shipping. SOLD

RPM axle nut setup (used) for 450r - I snapped the bolt and had to grind a bit to allow the bolt to come out the backside. It still works good as new. Splines are in like new condition. I didn't run this setup very long. $50 + $5 shipping

Prodigy Brake controller with new wiring harness for a 2003 Chevy Silverado. I bought a Prodigy 2 because I thought this one went bad. Truth is I had a bare wire touching on the trailer frame. $50 + $5 shipping.

NOSS aluminum case saver (used once) for 2006+ 450r engine. $20 + shipping.

Brake blockoff plate with flames - $5 plus shipping.

A/C front bumper - $25 + shipping SOLD

Precision dampner frame mounting bracket - fits 2006+ Honda 450r stock frames. - $25 + shipping

Stock 2008 450r axle (no hubs) - $40 plus shipping.

8" dual black ring Hiper wheels with hubs. These were only used in 2006 and 2007. The splines are in great shape and fit 400ex or 450r axle. - $150 plus shipping. SOLD.

[quad2xtreme]

RPM axle nut setup (used) for 450r - I snapped the bolt and had to grind a bit to allow the bolt to come out the backside. It still works good as new. Splines are in like new condition. I didn't run this setup very long. $50 + $5 shipping.

[quad2xtreme]

another...

Snapping bolts is common. I'd recommend using a bolt that is long enough to go all the way through. I'd also pre-drill the bolt so it is ready for an extractor. Or, put a slot in it so you could just use a flat blade screw driver to extract.

[quad2xtreme]

final one...

[quad2xtreme]

Prodigy Brake controller with new wiring harness for a 2003 Chevy Silverado. I bought a Prodigy 2 because I thought this one went bad. Truth is I had a bare wire touching on the trailer frame. $50 + $5 shipping.

[quad2xtreme]

NOSS aluminum case saver (used for one day of riding) for 2006+ 450r engine. $20 + shipping.

[quad2xtreme]

Brake blockoff plate with flames - $5 plus shipping.

[quad2xtreme]

A/C front bumper (400ex or 450r) - totally straight/not bent.


$25 + shipping - PENDING Receipt of money.

[quad2xtreme]

Precision dampner frame mounting bracket - fits 2006+ Honda 450r stock frames.

[quad2xtreme]

another...the portions you see when mounted to the frame are fine...

[skippy1999]

ill take the bumper and kill switch. u have a pm

[quad2xtreme]

Originally posted by skippy1999
ill take the bumper and kill switch. u have a pm

Marked as PENDING and will respond to PM.

[BUBBA Livesay]

Will the Rpm antifade lock nut fit the stock axle or just the Rpm axles?

[quad2xtreme]

Originally posted by BUBBA Livesay
Will the Rpm antifade lock nut fit the stock axle or just the Rpm axles?

It fits stock axles too.

[Trailie400]

pics of Hipers?

Thanks

[quad2xtreme]

Pic #1 - four rings front side

includes 24 new bolts for the outside rings, 24 old bolts for the inside rings, and 4 spare bolts.

1 of the rings has a bolt that was torqued down a bit much but won't impede it sealing properly. A new ring will run you $25.

[quad2xtreme]

other side of rings...

[quad2xtreme]

the main part of the wheels are in really good shape. A trick to keeping splines in great shape is to use low hold thread locker. It fills in any spaces and keeps them tight. These splines are like new...no wear and tear on the splines...

[quad2xtreme]

wheel #2, front side.

[quad2xtreme]

wheel #1, backside

[quad2xtreme]

wheel #2, backside...

[quad2xtreme]

side view...inside stickers are still in perfect shape...

[PaRedneckRiders]

Still got the killswitch??
If so do you know if it would work an a 400ex with an 05+ wiring harness.

[quad2xtreme]

Originally posted by PaRedneckRiders
Still got the killswitch??
If so do you know if it would work an a 400ex with an 05+ wiring harness.

killswitch sale is pending.