PDA

View Full Version : Laeger Pro-Trax Front end


quadmx791
02-01-2011, 01:18 PM
I am thinking about selling my Laeger T-Pin front end and was checking to see if there might be some people interested. All Parts for sale:

1. Chrome upper/lower a arms
2. Spindles
3. Tie rods (heims could use a rebuild $125 from laegers)
4. +1" Steering Stem
5. PEP PB1 front shocks set up for 190lb pro-am rider.

I believe this is +2.5" The quad measures just under 49" with this front end.

Price lowered 2-10-11:

$1100 for the Pro-Trax
$1100 for the Shocks or
$2000 for it all.

Let me know if anyone is interested.
croat1
02-01-2011, 11:00 PM
pm sent
blue_racer_85
02-03-2011, 07:13 PM
pm sent
quadmx791
02-04-2011, 06:18 AM
blue_racer_85,
I did not receive a PM from you, please send again.
Thanks
DEVINF450R
02-04-2011, 06:35 AM
WHAT LENGTH ARE PB1'S?
quadmx791
02-04-2011, 10:11 AM
Shocks are 20.25" long eye to eye. They are fully adjustable and are built for 190lb (with gear) pro-am rider. These shocks were serviced by SF Racing last March and have about 1 hour ride time on the service, so the oil in the shocks is still good. They would probably need a shot of Nitrogen to make sure they are set to the correct pressure. Other than that, these shocks are ready to go. They will work with Laeger T-Pin and Ball Joint front ends and JB...All Long travel, without any modification.
DEVINF450R
02-04-2011, 12:23 PM
How much for the shocks?
k7mm
02-05-2011, 02:45 AM
PM sent on the shocks!
k7mm
02-05-2011, 02:52 AM
PM sent on the shocks!
quadmx791
02-05-2011, 02:34 PM
All PM's replied to...
250Renvy
02-05-2011, 04:21 PM
Do you have spindles or just what's listed?

How much for the stem?
quadmx791
02-06-2011, 06:16 AM
I have updated my original post to show the spindles are included. I am selling a complete Pro-Trax front end, that can be bolted on and you are ready to go. All you would need is handle bars and hubs. The stem can only be used with a Pro-Trax front end and I will only sell this complete.

Thanks for your interest.
protrax
02-06-2011, 07:47 AM
so what does this fit ? 250R ? 450R
how wide is it / +3 +4 ?
quadmx791
02-06-2011, 02:49 PM
This is off of my 2005 TRX450R. I believe this front end is +2.5" The quad measures just under 49" with this front end.

Thanks for the questions.
quadmx791
02-10-2011, 04:42 AM
$1100 for the Pro-Trax
$1100 for the Shocks or
$2000 for it all.
quadmx791
02-13-2011, 07:19 PM
Bump
rpfeifer11
02-13-2011, 08:44 PM
Is there any play in the a arms besides the tie rods? Is there any chrome flaking? Send pics to ryancmi@yahoo.com
quadmx791
02-15-2011, 08:28 PM
email and pictures sent...