NY: parting out 87 250r, elka, duncan, esr, prodesign, new oem......

[gixxerbob]

I am parting out my 250r, all parts are from a 1987.
parting out a complete quad .
located in 11953 long island NY

Low hour engine since full rebuild 1.5 years ago, new cases 1.5 year ago, all new bearings and crank, Pro design shifter/ kick lever/case saver, Duncan cool head and 39mm carb (currently in quad and running.

PRICES EDITED 3/24/2011

Esr trx5 pipe 165$
Pro circuit exhaust 50
Pro design kill switch 15$
LSR +3 a-arms needs a tie rod end, standard travel -asking 250$
Elka shocks have been sold!!!!!!
Oem hub bearings and seal kit for 2 hubs (87/86) 5$
2 new clutch cables by motionpro 10$
Oem 1986 cylinder (no intake bridges) on original bore with new 86 wiseco piston .030 over with new oem wrist pin bearing OBO
87 and 98 front spindles and hubs with rotors OBO
front/rear calipers OBO
New oem clutch with springs (installed but never run) OBO
Answer roost boost 20$
Armadillo +2 +1 a-arms (no ball joints, 100$ on armadillo website) standard travel -200$
Aluminum Swing arm skid plate (bad shape) 10$
Magneto and stator OBO
Dual row bearing carrier and bearings OBO
2 right side 250r cases (not perfect but work fine) OBO
400ex near mint red oem plastics, headlights, tank shrouds and 4 month old oem black seat 250$obo shipping, sold complete
TONS of stock parts ….. stems, a-arms, axle, swingarm, suspension, hubs, radiators… OBO

http://s270.photobucket.com/albums/jj119/gixxerbob/


contact for prices or send offers and specify youe shipping zipcode
its easiest to e-mail me but i also check my pm's once in a while
e-mail: minimechanic1@yahoo.com
thanks -rob

as people ask for prices ill post the asking price i give them.

http://i270.photobucket.com/albums/jj119/gixxerbob/DSC00926.jpg
http://i270.photobucket.com/albums/jj119/gixxerbob/DSC00942.jpg
http://i270.photobucket.com/albums/jj119/gixxerbob/DSC00940.jpg
http://i270.photobucket.com/albums/jj119/gixxerbob/DSC00933.jpg
http://i270.photobucket.com/albums/jj119/gixxerbob/DSC00944.jpg
http://i270.photobucket.com/albums/jj119/gixxerbob/DSC00939.jpgPRICES EDITED 3/24/2011

[4x4 AG]

you have a rear master cylinder? I will take it is so.

Also, how about the rad. shrouds? can i get them too?

-justin

[gixxerbob]

i sold the rad shrouds, i only have 400ex shrouds for sale but im almost positive they are different. but thanks for asking, i have a ton of other 250r parts for sale that i couldn't remember to list.

[4x4 AG]

Originally posted by gixxerbob
i sold the rad shrouds, i only have 400ex shrouds for sale but im almost positive they are different. but thanks for asking, i have a ton of other 250r parts for sale that i couldn't remember to list.

what about the rear master cylinder?

[Ruf Racing]

Email sent.

[250Renvy]

PM sent

+ what about the baja rims?

[bean-oil]

sent a email.

[gixxerbob]

rims not for sale, sorry, maybe in a couple months.

[Becareless06]

interested in roost boost and clutch cable and pipe pm me price shipped to 26155

[Velvet-Casket]

How much for the front elka shocks? How much for the back elka?

[gixxerbob]

Everyone has been replied to and the first three guys to send me offers got the deal they were looking for because i considered them reasonable. Please keep in mind i have no use for these parts and they are only taking up space in my garage. please pm or e-mail for prices or to send offers.

thanks guys

[red88r]

email sent

[gixxerbob]

i posted some prices. Someone please negotiate with me haha because it seems that most people are afraid to or just not that interested. The offers that people sent me that were reasonable went through and otherwise no one responds to my asking price, its only my asking price, not firm prices. Like i said i have no use for these parts so send me some offers. pmore pictures comming as soon as the weather gets a little better.

[4x4 AG]

Can I get a picture of the 'new' clutch? What all does it consist of? Just steelies and fibers? Are they OEM Honda? What about an inner hub? You have that too?

Any issues with the 86 cylinder? No cracks? What does the bore measure?

Thanks,
Justin

[4x4 AG]

Can I get a picture of the 'new' clutch? What all does it consist of? Just steelies and fibers? Are they OEM Honda? What about an inner hub? You have that too?

Any issues with the 86 cylinder? No cracks? What does the bore measure?

Thanks,
Justin

[gixxerbob]

as the parts list says the clutch is oem (as i was told) and the cylinder is original bore (and comes with original and used piston to match it)

the clutch comes witht he inner hub (used), springs (used), and the ball bearing and hat piece at the end of the clutch rod. ill get some better pictures of the fibers and steelies.

http://i270.photobucket.com/albums/jj119/gixxerbob/DSC00943.jpg

the cylinder is in good shape, no porting, it was just a backup and needs a bore fitted to the new piston.

[4x4 AG]

Originally posted by gixxerbob
as the parts list says the clutch is oem (as i was told) and the cylinder is original bore (and comes with original and used piston to match it)

the clutch comes witht he inner hub (used), springs (used), and the ball bearing and hat piece at the end of the clutch rod. ill get some better pictures of the fibers and steelies.

http://i270.photobucket.com/albums/jj119/gixxerbob/DSC00943.jpg

the cylinder is in good shape, no porting, it was just a backup and needs a bore fitted to the new piston.

when you get those better pictures of the clutch, can you get one of the inner hub? i want to see if it has any grooves in it.

THanks.

Oh and never mind on the cylinder. The shop got back to me and mine is going to be fine for now. Thanks though.

[dirtycj5]

pm sent

[Honda 250r 001]

PM sent. Thanks

[bigmatt61]

Pm sent!

Thanks, Matt

[gixxerbob]

all pm's replied, i will be checking them more frequently this week.

[Honda 250r 001]

What size wheels do the nacs mud plugs fit? 8 or 9? What color are they? Can you send pics to hedberg345@hotmail.com?
thakns

[gixxerbob]

sorry, plugs are sold.

[gixxerbob]

some prices edited

[gixxerbob]

many parts still for sale, don't be afraid to shoot me an offer.

[gixxerbob]

prices have been edited. please send offers.