PDA

View Full Version : Help On Running Issues



ikuzus450
01-26-2011, 09:10 PM
HAVE 07 LTR VERY LOW HOURS. IT SAT FOR A FEW MONTHS BOUGHT NEW BATT AND STARTS FINE BUT WONT REV MUCH THEN STALLS ANY SUGESTIONS THANKS ALEX

nkillian9
01-27-2011, 10:39 PM
maybe gummed up fuel system from fuel sitting

bigbad400
01-28-2011, 07:22 AM
could have a mouse nest in ur intake too... dont ever start something bean sitting without oil change and filter cleaning. you can really damnge a motor that way. what if it had some moisture in your filter and you started it and vapor locked ur motor... that be real ****ty cus you didnt check **** over good enough. know whta i mean?

ikuzus450
01-28-2011, 09:52 PM
THANKS FOR THE INFO I CHANGED THE OIL CLEANED FUEL FILTER CHECKED INTAKE AND CLEANED THE AIR FILTER BEFORE ISTARTED IT I EVEN CLEANED TANK AND NEW FUEL ANY MORE SUGESTIONS AGAIN THANKS GUYS

nkillian9
01-28-2011, 11:39 PM
maybe fuel enricher plunger stuck or choke plunger

Drewltr450
01-29-2011, 04:18 PM
lucas fuel system and injector cleaner, or even better SEAFOAM. run it through your gas it did wonders for my sitting bikes autozone and major autoparts stores have them both.

bigbad400
01-30-2011, 07:29 AM
x2 on seafoam... ****s wonderful in sleds and stuff that sits for a season..

Limited Z_400
01-30-2011, 08:27 AM
Is your FI light on or flashing?

ikuzus450
01-30-2011, 12:27 PM
i hooked up the suzuki monitor to it and it had a dtc cam sensor malfunction like a dumb *** i cleared it before i wrote the code down. it never cam back on it will idel for a min or two and when you give it gas youcan feather it and it will pick up rpm s but then stall i will try the sea foam today and let you know thanks again alex