wanted shortened swing arm

[mx Eli]

i need a shortened swing arm for an 04/05 link
doesnt matter if it's stock cut down or aftermarket

cheaper is better

also if somebody can cut down a stock one let me know please

[brewster426]

use a 400ex swinger i think they are a inch shorter. i might be wrong

[jkiserracing]

Ive got an 04 swinger that I can sell you cheap if you want.

[mx Eli]

there's an 04/05 one on ebay for 25 bux but id still have to have it cut down

brewster I was wondering about that? do you know if its an inch shorter then the 04/05 version or 06+?? if anybody has a 400ex could ya just go measure from the pivot bolt to the center of the axel?
thanks everyone

[250x_kyle]

stockers are made out of cast aluminum. they could be cut down and re welded but it would be hard to have a go reliable weld that wouldnt have cracks all around after an ice race or two.

[mx Eli]

I have a buddy with a cut down one that's had sinse 06 and nvr had a problem racing open pro with it

[brewster426]

there is a thread where a guy has all the swingers side by side..250r 450r and 400ex. if i remember right the 04-05 in like .75 longer than the 400. just cut one down. make shure to bevel it right and dont grind the welds off. you should be good to go