Case Saver?

[coryatver]

Could someone look on the bottom side of the front sprocket and tell me if the case saver touches the chain, right where it sticks out on the bottom? I think mine might be bent and hitting the chain causing it to make an anoying noise. Or i might have a more serious problem but it is driving me crazy. It is not the valves.

The case saver should NOT touch the chain,,,sounds like your chains loose..

[coryatver]

The chain is tight. I thought maybe it was on wrong so i took it apart but its the only way it goes on. I think maybe it got bent or something. But the weird thing is it started doing it after i had it apart and put on new sprockets and chain. They are the stock sizes.

I think your chain is just a POS. Seriously. It might be worn out.

[redrider ex]

The front sprocket will go on ether way on one side of the sprocket it will say this side out maybe its on backwards.
redrider ex:huh

[coryatver]

Its a RK X ring with not even a tank of gas of riding on it. If i fliped the sprocket then It wouldn't make a difference, it would still touch. I wish i had a picture its hard to explain

[coryatver]

Here is a scetch i made

check for bent case saver bolts and file out the area touching

Out of curiosity does this contact occur when you are sitting on the bike and the suspension is loaded? I believe when the rear suspension is unloaded there is some minor contact. The best route would probably be to buy a nice aftermarket case saver. The stock piece is supposed to be a real hazard in chain break situations as the portion that covers the sprocket (the cage) gets the chain wrapped up in it and causes all kinds of other breakage.

[coryatver]

I think i will order a aftermarket one. thanks for the help. did you know they costs 30 bucks! ouch

$30 its well worth it, you will know when you throw a chain and BUST a case. I did it once THOR!!!-----> it sucks spend the 30 trust me.

[coryatver]

I think i am going to get a red nacs case saver. I think it will go well with my red parking break block off. My friend needed to replace his raptors front sprocket and i couldn't believe they do not even have one stock.

[400MXer]

I've got a Duncan Racing Case saver, it was like 20 or so i think. I would much rather spend the money on a case Saver than on a new case..........Mega$!!!

["BLAHH"300!!]

i understand the just of it all-

chain breaks- chain whips around- pops the case-
blng- nice fat crack-

but what are the side effect of this happening- ??

[knighttime]

cause all the oil will shoot out

Originally posted by knighttime
cause all the oil will shoot out

Yelp and get all over your pants and boots..

a side case is like 80 bucks from service honda..and a case saver is only 20 bucks..

Knighttime you got one of them yet??? You better with that torque monstor you got now..

[knighttime]

Now

may I recommend speedracing,,and did ya get the stuff from redrider ex???? Go ahead and get ya a muscle steering dampner from speedracing too..

[knighttime]

I have the money order ready to go but I need redrider ex's phone # so I can send his check overnight. The case saver I ordered was from Rockymountain ATV. I already have a Denton stabilizer. I'll get a muscle one when the denton wheres out.

GO STEELERS

[coryatver]

Do you ditch the stock cover when you put on an aftermarket case saver?

yup

["BLAHH"300!!]

couse mines cracked- been that way for about a month now
i noticed it one day while cleaning the gunk from the motor
but it doesn't shoot oil out anywhere....it's a crack about
2 inches long the zigs zags around a bit- but it's not an open crack- i couldn't slip a piece of papper through it -

why the hell didn't honda put a case saver on the bike in the first place....

well the 400's ship with case savers but I don't think it would do much saving,,it's made out of poop I think..invest in a aftermarket one,,but I don't know if they make them for 300ex's.

[ride red]

Hey Rico,
Does speedracing have a website or were can you order that case saver and that from?

[400exRacerX]

Yeah they do, www.speedracingproducts.com

and if u dont notice the oil, u will empty ur tank fast, and will burn ur gears and mbe clutch out, if u are very unlucky

[The400exExorcist]

get a prodesign, not sure if they make one for a 300ex but the 400 ones seem bullet proof

[400MXer]

I've got a Duncan Racing case saver...but...they are all the same,

but i have seen some that extend to cover the shift shaft. I think if i was to buy another one....i would get one with that.

[coryatver]

I got a case saver finally from speed racing. I put it on and i was wondering what do you do about that little wire that runs by there?:huh

[DEAL]

The 300ex comes with a lil weak case saver stock i think.

[mrusk]

Both 250r and 400ex come with case savers stock.

Originally posted by coryatver
I got a case saver finally from speed racing. I put it on and i was wondering what do you do about that little wire that runs by there?:huh

You will need to take a bolt out of the side case with the black rubber peice on it and relocate it so it will hold the wire in place..