sadame
01-21-2011, 09:38 AM
$155 shipped
This is a huge cam that makes big Top End power,
great for drag racing
here are the specs:
Megacycle X3 - Part # 108-x3
Full race cam max top end. Must use race piston and valve springs. Intake valve pocket may need cut on piston.
Intake Lift(inches): .435"
Exhaust Lift(inches): .385"
Intake Lobe Center (degrees): 104
Exhaust Lobe Center (degrees): 108
Intake Duration (degrees at .040"): 276
Exhaust Duration (degrees at .040"): 276
Intake Open / Close: 34 btc/62 abc
Exhaust Open / Close: 66 bbc/30 atc
Lobe Separation Angle: 106
Overlap: 64
This is a huge cam that makes big Top End power,
great for drag racing
here are the specs:
Megacycle X3 - Part # 108-x3
Full race cam max top end. Must use race piston and valve springs. Intake valve pocket may need cut on piston.
Intake Lift(inches): .435"
Exhaust Lift(inches): .385"
Intake Lobe Center (degrees): 104
Exhaust Lobe Center (degrees): 108
Intake Duration (degrees at .040"): 276
Exhaust Duration (degrees at .040"): 276
Intake Open / Close: 34 btc/62 abc
Exhaust Open / Close: 66 bbc/30 atc
Lobe Separation Angle: 106
Overlap: 64