laeger partout axis, duncan 265powervalve,tpin front,

[xtremelimit]

complete laeger tpin 250r.. here are some of what it has...

ONCE FRAME, MOTOR, OR TPIN IS SOLD PARTOUT BEGINS .THANKS FOR LOOKING....

laeger narrow black chasis
laeger chrome t pin front end
laeger chrome no link swingarm
laeger chrome steering stem anti vibe
89 motor..265 duncan powervalve complete motor with carb setup from duncan..
aluminum radiator and shrouds..
hinson quick change cover
duncan chrome front bumper
ac rear grab bar
custom axis front long travel shocks comp rebound
custom axis no link rear shock comp rebound
ac skid plate
lonestar axle
dual bearing carrier
duncan chrome pipe and fatboy silencer
did oring gold chain
ac pro peg nerfbars black nets
oem white plastics
black hood
clarke black tank
renthal bars
baldwin top clamp with tether switch mount
pro design kill switch
rtc clutch lever and perch
black stainless brake lines front and rear
aluminum brake line clamps
gary denton stabilizer
ceet seat cover
beadlocks rear turf tamers
alum airbox k&n filter

http://i164.photobucket.com/albums/u35/fisrus/laeger.jpg

http://i164.photobucket.com/albums/u35/fisrus/laeger2.jpg

http://i164.photobucket.com/albums/u35/fisrus/laeger3.jpg

http://i164.photobucket.com/albums/u35/fisrus/laeger4.jpg

http://i164.photobucket.com/albums/u35/fisrus/laeger5.jpg

http://i164.photobucket.com/albums/u35/fisrus/laeger6.jpg

http://i164.photobucket.com/albums/u35/fisrus/laeger7.jpg

[xtremelimit]

ANY QUESTIONS YOU CAN TEXT FOR FASTER RESPONSE THANKS (631) 317-0601...


265 POWERVALVE MOTOR 1,500.
LAEGER FRAME AND SUBFRAME 1,200.
LAEGER NO LINK SWINGARM 500.
CUSTOM AXIS REAR SHOCK 600.
CUSTOM AXIS FRONT SHOCKS 800.
CARB duncan 150
AC NERF BARS 100.
FRONT HUBS w/rotors 60
REAR HUBS 30
LSR AXLE 100
BEARING CARRIER 60.
ANTIFADE NUT 100.
WHITE OEM PLASTICS 200 for front 200 for rear
SEAT 100.
SEAT LOCK 20
AC REAR GRAB BAR 35
STABILIZER 7 WAY 75
Clarke black GAS TANK 150.
FRONT BRAKE CALIPERS w/pads 100
REAR BRAKE CALIPER w/pads 75
FRONT BRAKE LINES 40
REAR BRAKE LINE 20

[curly#44]

can i get a good pic of the axle

[xtremelimit]

curly #44> yes should have by tomorrow.............

[rablack21]

Can I also get a pic of the axle to rablack21@gmail.com

Thanks

[xtremelimit]

k no problem..rablack..

strong motor fast !!!!!!!!!!

[250x_kyle]

interested in axle, axle carrier, and rear hubs. price shipped to 16232

[Burns310r]

OP check your mail box.

[xtremelimit]

inbox should be good

[QuadforceDavid]

Do you have a price in mind for the entire quad as a whole?

[xtremelimit]

bump need to sell frame or tpin ,motor before partout..

[smglamis]

PRICE ON WHOLE QUAD

[xtremelimit]

pm sent

[tommyboy1971]

picture of frame to haglertc@hotmail.com

[xtremelimit]

there is pics on first page ..

[tommyboy1971]

Yeah I can't see it, it just shows red x's. I need it in JPG format. Nevermind though.

[sameltoe]

somebody buy the frame so I can buy the front shocks! lol

[Velvet-Casket]

COME ON INCOME TAX MONEY! I want that frame. lol It will prolly be gone anyways b4 i get my funds.

[xtremelimit]

LOL still got it i havent even begun partout cause nobody bought the frame or motor yet ...and i have a ton of parts that are wanted lol.......

[k7mm]

I'll buy the air box when your ready!What size is the carb?If it's a 39mm with the super flow mod then I'll probably take that also!
Keith

[xtremelimit]

tommy boy sorry i didnt know you couldnt see them i sent them over to your email...thanks for looking guys...k7mm yes thats the carb ...

[fourtrax_r]

how much for the complete quad?

[xtremelimit]

6,500

[rablack21]

I still never got a pic of the axle. Can you send my a pic if you still have it?
To rablack21@gmail.com

Thanks
Ryan

[troybilt]

I'd take the radiator/shrouds! If no one had spoken for it.

crownlineboats@hotmail.com

[Trxjim]

How much to you want for the frame, rear shock and rear swingarm?

[Fear250r]

Did you buy this off someone else recently?

[Jonny B]

Originally posted by troybilt
I'd take the radiator/shrouds! If no one had spoken for it.

crownlineboats@hotmail.com

Sorry Troy, I have dibs on the radiator for a while...just waiting for the frame to sell.:D

[xtremelimit]

sorry guys havent checked this in a while ..

TROY: yes dibs are on the radiator sorry..

FEAR250r: unless over ten years is recent no lol

TRXJIM: frame, rear shock and swinger 2200. + ship

rablack: axle spoken for sorry..


ANYONE WANT THE TPIN WIL SELL FOR 1400 + SHIP

[danhung11]

Once you begin the partout, I am interested in the following:

1) Clarke Tank
2) Duncan Bumper

Thanks and good luck with the sales.
Dan

[xtremelimit]

OK im trying here lol i have alot of the smaller parts spoken for i just want to get rid of some big stuff first lol...


CMON GUYS PEOPLE ARE BEING PATIENT ...

TPIN CHROME 1400 + SHIPPING OR WITH SHOCKS 2100 WITH FRONT AXIS + SHIPPING

265 POWERVALVE 1500 + SHIPPING

FRAME, SWINGER, REAR SHOCK , 2200 + SHIPPING

[xtremelimit]

somebody buy the tpin or motor ,shocks , frame.....

[bigmatt61]

Yeah, cause I need an airbox!!

[250Renvy]

Originally posted by xtremelimit
OK im trying here lol i have alot of the smaller parts spoken for i just want to get rid of some big stuff first lol...


CMON GUYS PEOPLE ARE BEING PATIENT ...

TPIN CHROME 1400 + SHIPPING OR WITH SHOCKS 2100 WITH FRONT AXIS + SHIPPING

265 POWERVALVE 1500 + SHIPPING

FRAME, SWINGER, REAR SHOCK , 2200 + SHIPPING


Prices are too high - lower them and they'll move. Unless your stuff is perfect condition and rebuilt with NO time on it, people are going to need to refurb and put money into it to make it fresh.

T-pin chrome - $1400 + shipping + $600 rebuild = Might as well buy new.

265 powervalve $1500 + shipping + rebuild (if there is nothing wrong, just new bearings/seals/ piston/rings = $2000. (Not soo bad, but most people want more power)

Frame, swingarm and rear shock $2200 + new bearings + shock rebuild $2-300 + if someone doesn't like the color +powder = $2800

This stuff doesn't hold value.

You can tell me where to go if you want, but a Fair price for these are:

T-pin - $900-$1000

Motor - $1200 shipped

Shocks - Front and Rear $1000

Frame/ swingarm - $1000

That's 4 items for $4000 - nickel and dime the rest for $1000 and you have $5000 - what the quad is worth.

[xtremelimit]

the tpin you cant buy its a different design and its chrome which is in excellent condition doesnt have to be rebuilt..

shocks have very little time on them

frames ive seen go for what im asking

just cause its not selling fast doesnt mean its not worth it its worth it to whoever wants it ....and as these parts will be harder and harder to find the prices eventually will go up probably when im gonna build my next one......but thanks for the info..

[Yfz245]

I'm just curious but know what is actually different about the pro trax?

[troybilt]

+4 Tpins can bring that much or more... since they are more rare than +3's. Its all nice stuff you've got forsale... if you're patient i bet you could get close to what you're asking... if you're looking for a quick sale might help to lower them a little... but its you're bike, man... I still want the radiator, unless I find one bw. now and the time you decide to part out.... LOL!!

[gtilley45]

Originally posted by Yfz245
I'm just curious but know what is actually different about the pro trax?

If you mean what is different about his as opposed to ones sold now..........the TRUE pro trax stems were connected to the tie rods the same way the spindles are connected to the a arms on a pro trax (with the t-pin bearings) and that was what made the pro trax so great back in the day. They had next to zero bump steer and from what I was told todays version of the pro trax isn't quite as good because it doesn't come with the pro trax style steering stem which is one of the key components.

[k7mm]

Originally posted by bigmatt61
Yeah, cause I need an airbox!! Sorry I have dibs already on the airbox and carb!

[Ruf Racing]

Originally posted by xtremelimit
the tpin you cant buy its a different design and its chrome which is in excellent condition doesnt have to be rebuilt..

shocks have very little time on them

frames ive seen go for what im asking

just cause its not selling fast doesnt mean its not worth it its worth it to whoever wants it ....and as these parts will be harder and harder to find the prices eventually will go up probably when im gonna build my next one......but thanks for the info..

How is the motor? How many hours on this build?

[xtremelimit]

The motor is strong only a few hours on it ..starts rite up runs very good...

[xtremelimit]

new price on motor 1400 + shipping the lowest i can go ..text 631 317-0601 thanks

[xtremelimit]

new price on motor 1400 + shipping the lowest i can go ..text 631 317-0601 thanks

[berkis]

how much is shipping?

[k7mm]

Originally posted by xtremelimit
new price on motor 1400 + shipping the lowest i can go ..text 631 317-0601 thanks I think that is a great price on your engine!

[xtremelimit]

Thank you i think it is to i hope not to low lol cause i know as soon as im done parting this out im gonna be kicking myself in the *** lol and gonna build another one and probably not find stuff for a good price ..

does anybody know what shipping would be im guessing from 80 -100 bucks i am located on longisland NY

[Ruf Racing]

Most say complete motor, in a cooler 60lbs.

[sameltoe]

keep me in mind for the front shocks:D

[troybilt]

Motor's shipped in a cooler, better figure 100 bucks...

I agree the price on the motor should be right in there... If it was a 340 top end vs. the 265 you'd already been paid for it... :D

[xtremelimit]

Ok thanks guys !!!!!!!! and yes sameltoe fronts lol im almost there i think

[red88r]

Bump for good deal...my brother had this set up on his 87 and it was awesome!.. The cylinder kit costs more than this whole motor. If I had extra money this would be mine.:D

[xtremelimit]

Thank you red88r finally someone sees lol...I paid over 3,000 just for the kit ..and its a 89 bottom end hinson quickchange well worth it almost makes me not want to sell it maybe throw it in my 86 r ...

[HAYESTRX250R]

Part outs like this make me sad:(

[Velvet-Casket]

Hey can you use a stock swingarm and shocks on your laeger frame or is it long travel only? Also the front shocks, stock or long travel? What is your bottom dollar for your frame and subframe?

[xtremelimit]

makes me sad to ..........and yes you need long travel ..frame and subframe 1200

[xtremelimit]

Anybody tpin front end 1400 + shipping....

265 powervalve motor 1400+ shipping ....


I dont see these parts for sale somebody has to need something lmao..................


text 631 317-0601

[xtremelimit]

bump

[sameltoe]

Sorry extreme...Im to impatiant, Found a set.
Sam

[xtremelimit]

yea i hear ya lol i was gonna actually thinking of letting them go but is what it is......

cmon motor tpin somethinggggggggggggg maybe its a sign to keep this thing lol...........

[k7mm]

Originally posted by xtremelimit
yea i hear ya lol i was gonna actually thinking of letting them go but is what it is......

cmon motor tpin somethinggggggggggggg maybe its a sign to keep this thing lol........... Have you considered trying to sell the engine on ebay?There is basically the same engine on there and has been on there for $1999.00 plus shipping,and it does'nt even come with a ignition.Here is a link to it
http://cgi.ebay.com/ebaymotors/Honda-TRX-250R-DUNCAN-PC-2000-265-POWER-VALVE-MOTOR-_W0QQcmdZViewItemQQhashZitem20b473665aQQitemZ14046 6415194QQptZMotorsQ5fATVQ5fPartsQ5fAccessories
I have shipped multiple engines useing the tote method that CT Racing recommends.I usually get some 1"to 2" insulating foam and put it in the bottom.I've shipped to Texas and Florida from ohio and I do'nt think that it cost me more than $65.00 shipping with FEDEX. Here is a link to the shipping instuctions from CT.
http://ctracing.com/shipping_instructions.htm
Also I built a whole 250R from scratch a few years back piece by piece all off of ebay.Not everyone knows about this site!

[k7mm]

I may be interested in buying this engine,depending on what is in the bottom end.
What year transmision is in it?
Does it have a Hinson clutch basket?Does it have the inner and outer Hinson clutch hubs?
Does it have a timing advancer?
What length rod does it run?And is it a oem crank?
Does it have a oem wattage stator?
Does it have the stock flywheel?

Keith

[xtremelimit]

ok it is a 89 complete lower
stock flywheel
stock ignition
oem crank
hinson quick change
believe it has hinson basket i can check i have to drain oil anyway

[xtremelimit]

cmon people lol

[xtremelimit]

hey k7mm i didnt get your pm :ermm:

[k7mm]

Originally posted by xtremelimit
hey k7mm i didnt get your pm :ermm: Sorry,it's on it's way now!

[lp designz]

Excuse me for my ignorance I'm a complete newb to these but I picked up a nice 250r a 87 I wasn't gonna restore it but I got bitten by the bug!!!! Would my parts bolt up to that frame???? Another stupid question "don't laugh" what's a tpinn front end consist of??? I might be interested in the frame and swinger with the front end and front shocks lol...

[xtremelimit]

sent you a pm lp designz

[k7mm]

Hey xtreme!I sent you a pm!

[xtremelimit]

BUMP

[1977darren0]

would you sell just the a arms and how much?thanks

[xtremelimit]

yes the a arms come with spindles and steering stem and tie rods...1400+shipping

[xtremelimit]

bump

[Yfz245]

Pm sent

[xtremelimit]

bump

[xtremelimit]

axis front shocks , duncan 265 powervalve, axis rear shock, laeger tpin chrome front end , laeger swinger,laeger frame.

631 317-0601

[xtremelimit]

bump 631 317-0601 text...

custom axis front shocks ....custom axis rear shock....

duncan racing powervalve 265....1400+ ship

tpin front end 1400+shipping

[xtremelimit]

lets start this partout what do you guys want any questions text 631 317-0601

[sameltoe]

How much for the radiator set-up?
Rad, shrouds, and whatever that center piece is...

...does this fit all years oem/aftermarket or specific frames...
sorry for the newbie ?

Edit...Oops just read threw some posts and seen it's spoken for...

[4x4 AG]

i wanted the rear master cylinder. you shot me a price on it way back when you first put up this post.

[bigmatt61]

PM SENT!!!

Matt

[gtilley45]

What all do you still have? I need a few small odds and ends.

[xtremelimit]

pm sent....i have alot of stuff here let me know what you need text 631 317-0601...

[xtremelimit]

anybody laeger no link frame ,lsr axle, antifade, nerfbars, duncan carb, pipe silencer, swinger, shocks, grab bar ,skid plate,reed cage, rotors, front hubs,rear hubs,front brakes, rear brake,front master cylinder, wiring harness complete cdi,renthal bars, baldwin clamp,steering stem clamp,clutch lever and perch, front billet rims and tires,front and rear plastics, ceet cover foam and pan.seat lock,air boot,cables,sprockets and gold chain, chain sliders,clarke black tank,thumb throttle,stock radiator, stock red tank, dg front bumper ,bearing carrier

631 317-0601 text anytime....

[quadfmx]

trying to pm you,
ill call u tomorrow,
this is J we been talking in email

[wild250rman]

pics of anti fade and duncan carb and some info. rwildman@cebridge.net

[xtremelimit]

custom axis front shocks triple rate springs compression and rebound 19" eye to eye 800.+ship

custom axis rear shock no link dual rate spring compression and rebound 18" eye to eye 600+ ship

text 631 317-0601

[xtremelimit]

lots of parts left still text 631 317-0601

[xtremelimit]

bump...lots of good parts taking off ready to go

[xtremelimit]

http://i164.photobucket.com/albums/u35/fisrus/photo-21.jpg

http://i164.photobucket.com/albums/u35/fisrus/photo-25.jpg

http://i164.photobucket.com/albums/u35/fisrus/photo-26.jpg

http://i164.photobucket.com/albums/u35/fisrus/photo-21.jpg

[Jonny B]

I got the radiator a few days ago and its a beautiful thing. I was just looking at your pile of parts and had to send you another pm...

[xtremelimit]

thanks jonny b ...pm sent