450r air screw?

[wild250rman]

Is there any companies out there that make's an adjustment screw for the stock 05 carb. that can be adjusted by hand instead of trying to get to it with a screw driver? or any other suggestions.

[Pacheco_450r]

I'm not sure about an after market adjustment screw, but this tool comes in handy! You just turn the handle to turn the head of the screw driver.

http://www.amazon.com/Motion-Pro-Pilot-Adjusting-08-0119/dp/B000WJBMQK

[Thumpin440ex]

Yes there is. Tusk, MSR, I am sure a few others. I have one for the carb but it is for a fcr style carb, not our 04-05 style..

John

[wild250rman]

That is a nice adjustment tool Pacheco_450r if i don't locate an air screw i will definataly look into that.
Thumpin440ex did you do any mods to the carb. or needle or did it just fit with no mods?

[Baileygunns]

There is NO after market fuel screw for the 04/05 carb... I have searched long and hard for one.

Some one PLEASE prove me wrong!

[Baileygunns]

This is a picture of a Tusk fuel screw for an FCR carb (the only one they make) and the stock fuel screw for the 04/05. This is a picture I took myself, not one I found on the internet.
http://i50.photobucket.com/albums/f348/Baileygunns/bike004.jpg

[wild250rman]

definatly not the same.

[Baileygunns]

Nope.

[Thumpin440ex]

These guys have them. I have a quote from the guy at woodwards from a 450r forum.. I would still call and verify it though

http://www.woodwardspecialties.com/productdetail.htm?productId=9863834&ez=fuel%20screw~q=ssaafuel%20screwzz~r=~

''The R&D flexjet is for the FCR carbs.... however the 04/05 carb uses the same thread, and the FCR screws will work in the 04/05 carbs too''

I know the threads are the same, but the needle length is diff.. I had another one in my bookmarks also, but can not find it :(

John

[Baileygunns]

I think the picture I posted sums it up...