Dale Jr WORCS racer 17y

[bignasty]

Here is a short video we did on Dalr Jr's 2010 WORCS Season. Enjoy!!!

http://www.youtube.com/watch?v=6lulQQawIuk

[tyler70t]

Really cool video!

[hotquads1]

great video!

[TTracer#22]

Cool Video Dale see you guys in a few days!

[hanker]

Nice!!!

[BradLoomis]

Nice video!

Thanx for the shout out at the end!

Dave is having the new "DC X~Stream" website built right now. We have alot of new prototype stuff going through right now.

[raidernut]

Brad

anything going on for Raptor 250? we are mini quaded out!!! In building process now.

[BradLoomis]

I just sent Dave my spare KTM bolt together stem and a carbon fiber shaft, for him to build the first fully bolt together stem for Tim Farr to test. I also sent some curved carbon fiber plates for the TRX 450 motor mounts from his curved molds he sent me. He has some of the new tubes that I built for his aluminum / carbon fiber bumpers and grab bars that he has posted on face book. And I just received Chase's MX version sway bar for testing. It's pretty much the same as I did for Rath, except that I am changing torsion bar design to be more manufacturing friendly. The entire assembly weighs 3.7 lbs.
http://i216.photobucket.com/albums/cc52/X-Stream_Composites/DC%20X-Stream/KTM002.jpg
http://i216.photobucket.com/albums/cc52/X-Stream_Composites/DC%20X-Stream/KTM001.jpg

And I believe these are motor mounts for the Raptor
http://i216.photobucket.com/albums/cc52/X-Stream_Composites/DC%20X-Stream/Raptor250motorounts.jpg
Once we get the new top designed for the KTM, we will start with all of the other models.

[riding4fun]

Love it!!!

[raidernut]

Cool video dale! tell little dale to get off Buddy's butt, hes riding too close, i may have to send him out with a pocket full of nails to throw out:blah:

[coffing918]

worcs looks awesome!

[edwardsp&b]

Nice video! Worcs looks fun!

Brad, you and Dave are making some badass stuff. We also are building a Raptor 250, I cant wait to see some of the goodies you guys come out with.
Bryan

[raidernut]

Originally posted by edwardsp&b
Nice video! Worcs looks fun!

Brad, you and Dave are making some badass stuff. We also are building a Raptor 250, I cant wait to see some of the goodies you guys come out with.
Bryan

looks like a lot of people are going the raptor 250 route. I dont know what ill do in my spare time now!!

[BradLoomis]

Originally posted by raidernut
looks like a lot of people are going the raptor 250 route. I dont know what ill do in my spare time now!!

There's always knitting:D :D :D

[raidernut]

Originally posted by BradLoomis
There's always knitting:D :D :D

not a bad idea. do you think you can build me a set of carbon fiber knitting needles? sent ya a pm as well

[bignasty]

Originally posted by BradLoomis
Nice video!

Thanx for the shout out at the end!

Dave is having the new "DC X~Stream" website built right now. We have alot of new prototype stuff going through right now.

Brad I need your address. Dale

[bignasty]

Originally posted by raidernut
Cool video dale! tell little dale to get off Buddy's butt, hes riding too close, i may have to send him out with a pocket full of nails to throw out:blah:

Thanks to all you guys. it was something we had put together with a friend of ours. He casted Jr in a small budget film here in NM and he really wanted to do something nice for him. I just gotta figure how to mount his camera the brackets they sent me for the helmet I DONT TRUST THEM. ($300 camera!!!!)

[BradLoomis]

P.O. Box 327
Woodland, Wa. 98674
(360) 225 - 7526

[raidernut]

Originally posted by bignasty
Thanks to all you guys. it was something we had put together with a friend of ours. He casted Jr in a small budget film here in NM and he really wanted to do something nice for him. I just gotta figure how to mount his camera the brackets they sent me for the helmet I DONT TRUST THEM. ($300 camera!!!!)

dale is it a go pro camera? if it is the mounts are very strong. I tried to take an old mount off buddys helmet and almost tore a hole in it.

[bignasty]

No its the contour HD camera. Igot the water proof cover for it and it mounts on a railsystem. Just trying to see if maybe bolt it on the helmet but then I need adjustment.

[raidernut]

oh i see, you coming to Primm?

[bignasty]

goona try if i can get everything together. We had to leave the camper at a shop two and a half hours from our house, and i thought i had drained all the water, but a couple of the lines froze and had to take apart some of the undercarriage to get to the water lines....man what i would give to be in cali right now....we even have a state of emergency here...the natural gas has been shut off from here in Espanola, to the colorado state line....-12 degrees last night Mark....:( :(

[raidernut]

Well i hope you have plenty of wine to warm you up:D supposed to be in the 80's here by saturday.
on a serious note, you guys be careful, and let me know if you need anything.

[bignasty]

Thanks appreciate that. Hpe you boys and girls liked your calenders....:) ;) ;) :)

[TTracer#22]

Same here Dale if we can do anything to help let me know!

[bignasty]

Thanks briant. Did u get your things I left in your trailer????

[TTracer#22]

Yes Thank you:D