Upgrades i should get

[400exHondaRider]

What upgrades do you guys think i should get?
so far i have:

2002 416ex
stage 2 hotcam
doug eichner carb
white bros exhaust
kn filter
Jt 11:1 piston
lonestar +2 a arms
Durablue +2 axle
Works shocks
pro taper bars
and some other odds and end things.

Whats next?

[Scro]

I would upgrade the shocks. Works are better than stock, but a high quality shock like Axis or PEP is that much better than Works. Especially if you get them reworked for your weight and riding ability.

[JOHNDOE83]

I would do the air box removal and the crank case breather mod.

Then jett again.

[beags86]

Originally posted by JOHNDOE83
I would do the air box removal and the crank case breather mod.

Then jett again.

what the heII is the crank case breather mod?

[trailrider894]

Originally posted by beags86
what the heII is the crank case breather mod?

x2 I wanna know about this...........

[atver13]

x3

[400exHondaRider]

i have my airbox removed and im going to upgrade my suspension in the future i dont have enought to get shocks right now though.

[JOHNDOE83]

"The crank case breather mod"

Is when you disconnect the crankcase breather tube from your intake, pull off the plastic oil catch, and install a filter.

Then you plug the whole in the intake boot with a piece of rubber hose and add a bolt or some RTV silicone.

This mod allows more fresh air into your intake instead of recycled crank case air.

[trailrider894]

Originally posted by JOHNDOE83
"The crank case breather mod"

Is when you disconnect the crankcase breather tube from your intake, pull off the plastic oil catch, and install a filter.

Then you plug the whole in the intake boot with a piece of rubber hose and add a bolt or some RTV silicone.

This mod allows more fresh air into your intake instead of recycled crank case air.

Whats the power benefit?

[slightlybent47]

I think I would rather have the hot air pulled from the motor in hops of it keeping it cooler. I wonder what the gains would be with that mod?

You have almost the same build as me and I think my next move will be a precision steering stabilizer. My friends say they work great and most of them use them now. There kinda pricy though at $485.00. but I’ve been told there worth it.

[400exHondaRider]

ya im also thinking that i since it runs good and my suspensin isnt to bad right now that i might just tear everythinng down pc it and stuff like that for now